Document the watchdog timeout mode property. If this property is used the user can select what happens on watchdog timeout. Set this property to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device will go to POWERDOWN on watchdog timeout. Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx> --- Documentation/devicetree/bindings/watchdog/da9062-wdt.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt index 950e4fba8dbc..e3e6e56cee21 100644 --- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt @@ -10,6 +10,9 @@ Optional properties: - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. Only use this option if you can't use the watchdog automatic suspend function during a suspend (see register CONTROL_B). +- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the + watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers + POWERDOWN. Can be 0 or 1. Example: DA9062 -- 2.25.1
