[PATCH v2 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add constants for choosing USIv2 configuration mode in device tree.
Those are further used in USI driver to figure out which value to write
into SW_CONF register. Also document USIv2 IP-core bindings.

Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
---
Changes in v2:
  - Combined dt-bindings doc and dt-bindings header patches
  - Added i2c node to example in bindings doc
  - Added mentioning of shared internal circuits
  - Added USI_V2_NONE value to bindings header

 .../bindings/soc/samsung/exynos-usi.yaml      | 135 ++++++++++++++++++
 include/dt-bindings/soc/samsung,exynos-usi.h  |  17 +++
 2 files changed, 152 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
 create mode 100644 include/dt-bindings/soc/samsung,exynos-usi.h

diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
new file mode 100644
index 000000000000..a822bc62b3cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's Exynos USI (Universal Serial Interface) binding
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@xxxxxxxxxx>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
+
+description: |
+  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
+  USI shares almost all internal circuits within each protocol, so only one
+  protocol can be chosen at a time. USI is modeled as a node with zero or more
+  child nodes, each representing a serial sub-node device. The mode setting
+  selects which particular function will be used.
+
+  Refer to next bindings documentation for information on protocol subnodes that
+  can exist under USI node:
+
+  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
+  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+  [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
+
+properties:
+  $nodename:
+    pattern: "^usi@[0-9a-f]+$"
+
+  compatible:
+    const: samsung,exynos-usi-v2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus (APB) clock
+      - description: Operating clock for UART/SPI/I2C protocol
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ipclk
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to System Register syscon node
+      (for the same domain where this USI controller resides) and the offset
+      of SW_CONF register for this USI controller.
+
+  samsung,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Selects USI function (which serial protocol to use). Refer to
+      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
+
+  samsung,clkreq-on:
+    type: boolean
+    description:
+      Enable this property if underlying protocol requires the clock to be
+      continuously provided without automatic gating. As suggested by SoC
+      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
+      multi-master mode. Usually this property is needed if USI mode is set
+      to "UART".
+
+      This property is optional.
+
+patternProperties:
+  # All other properties should be child nodes
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: Child node describing underlying USI serial protocol
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - samsung,sysreg
+  - samsung,mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/samsung,exynos-usi.h>
+
+    usi0: usi@138200c0 {
+        compatible = "samsung,exynos-usi-v2";
+        reg = <0x138200c0 0x20>;
+        samsung,sysreg = <&sysreg_peri 0x1010>;
+        samsung,mode = <USI_V2_UART>;
+        samsung,clkreq-on; /* needed for UART mode */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+        clock-names = "pclk", "ipclk";
+        status = "disabled";
+
+        serial_0: serial@13820000 {
+            compatible = "samsung,exynos850-uart";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+            clock-names = "uart", "clk_uart_baud0";
+            status = "disabled";
+        };
+
+        hsi2c_0: i2c@13820000 {
+            compatible = "samsung,exynosautov9-hsi2c";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+            clock-names = "hsi2c_pclk", "hsi2c";
+            status = "disabled";
+        };
+    };
diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h
new file mode 100644
index 000000000000..a01af169d249
--- /dev/null
+++ b/include/dt-bindings/soc/samsung,exynos-usi.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
+ *
+ * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface).
+ */
+
+#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
+#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
+
+#define USI_V2_NONE		0
+#define USI_V2_UART		1
+#define USI_V2_SPI		2
+#define USI_V2_I2C		3
+
+#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux