[PATCH v9 0/3] media: i2c: isl7998x: Add driver for Intersil ISL7998x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is v9 of the series to for adding the isl7998x driver [0].

The isl7998x is an analog video to MIPI CSI-2 or BT.656 converter. The dt
binding describes only the isl79987 chip, which supports MIPI CSI-2. The
driver could be extended to handle isl79988 (for BT.656), too, but this isn't
implemented.

v9 fixes the following warning when running the dt_binding_check, by removing
the clock-lanes property from the example and adding the data-lanes property
to the specification.

	isl7998x_mipi@44: ports:port@0:endpoint: Unevaluated properties are not allowed ('clock-lanes', 'data-lanes' were unexpected)

Michael

[0] https://lore.kernel.org/linux-media/20190520201812.7937-1-marex@xxxxxxx/

Changelog:

v9:

- remove clock-lanes from dt binding example
- add data-lanes to dt binding example

v8:

- rebase on v5.16-rc1
- fix warning about ignored type qualifier

v7:

- add reservation and documentation for custom V4L2 controls
- implement g_input_status, g_tvnorms, querystd, s_std, g_std
- use v4l2_norm_to_name instead of custom implementation
- fix off-by-one with 4 inputs
- fix polling condition for standard detection

v6:

- incorporate review feedback by Philipp Zabel into isl7998x.c

v5:

- ignore -ENOIOCTLCMD of pre_streamon for backwards compatibility

v4:

- add patch for imx6-mipi-csi2 to request LP-11 mode
- update isl7998x driver with review feedback on v3

v3:

- rename pd-gpios property to powerdown-gpios
- reference graph.yaml for port/ports property
- remove reference to video-interfaces.txt

v2:

- convert dt binding to yaml
- change binding to ISL79987 only
- general driver cleanup
- convert driver to pm_runtime
- use ports in device tree for specifying inputs
- add reset gpio

Marek Vasut (2):
  media: dt-bindings: Add Intersil ISL79987 DT bindings
  media: i2c: isl7998x: Add driver for Intersil ISL7998x

Michael Tretter (1):
  media: imx6-mipi-csi2: use pre_streamon callback to set sensor into
    LP11

 .../bindings/media/i2c/isil,isl79987.yaml     |  113 ++
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/isl7998x.c                  | 1543 +++++++++++++++++
 drivers/staging/media/imx/imx6-mipi-csi2.c    |    9 +-
 include/uapi/linux/v4l2-controls.h            |    6 +
 7 files changed, 1689 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
 create mode 100644 drivers/media/i2c/isl7998x.c

-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux