This series adds support to the cpsw driver to read the MACIDs of the am335x chip and use them as fallback. These addresses are only used if there are no mac addresses in the devicetree, for example set by a bootloader. In v4 I removed an unused Makefile rule which was introduced by me when this series introduced a seperate driver to read the MACID. As the code is now integrated into the main driver this is not necessary anymore. Best regards, Markus Pargmann Markus Pargmann (7): DT doc: net: cpsw mac-address is optional net: cpsw: Add missing return value net: cpsw: header, Add missing include net: cpsw: Replace pr_err by dev_err net: cpsw: Add am33xx MACID readout am33xx: define syscon control module device node arm: dts: am33xx, Add syscon phandle to cpsw node Documentation/devicetree/bindings/net/cpsw.txt | 6 +++- arch/arm/boot/dts/am33xx.dtsi | 6 ++++ drivers/net/ethernet/ti/Kconfig | 2 ++ drivers/net/ethernet/ti/cpsw.c | 49 ++++++++++++++++++++++++-- drivers/net/ethernet/ti/cpsw.h | 1 + 5 files changed, 60 insertions(+), 4 deletions(-) -- 2.1.0.rc1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
