Hi Nicolas,
Could you test with:
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-rockchip.yaml
On 11/26/21 4:43 PM, Nicolas Frattaroli wrote:
> This adds the four spi nodes (spi0, spi1, spi2, spi3) to the
> rk356x dtsi. These are from the downstream device tree, though
> I have double-checked that their interrupts and DMA numbers are
> correct. I have also tested spi1 with an SPI device.
>
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk356x.dtsi | 68 ++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 46d9552f6028..57c0197cc65a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -39,6 +39,10 @@ aliases {
> serial7 = &uart7;
> serial8 = &uart8;
> serial9 = &uart9;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + spi2 = &spi2;
> + spi3 = &spi3;
> };
>
> cpus {
> @@ -742,6 +746,70 @@ wdt: watchdog@fe600000 {
> clock-names = "tclk", "pclk";
> };
>
> + spi0: spi@fe610000 {
> + compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> + reg = <0x0 0xfe610000 0x0 0x1000>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Move above status.
> + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
> + clock-names = "spiclk", "apb_pclk";
> + dmas = <&dmac0 20>, <&dmac0 21>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "high_speed";
Keep position of pinctrl-names in line with other nodes in this file
below pinctrl-0.
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dt.yaml: spi@fe610000:
pinctrl-names:1: 'sleep' was expected
From schema: /Documentation/devicetree/bindings/spi/spi-rockchip.yaml
Missing "high_speed" support?
spi: rockchip: set higher io driver when sclk higher than 24MHz
https://github.com/rockchip-linux/kernel/commit/7e4349ec9d70dbcfe7f78125700d2685539ea1bd
> + pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
> + pinctrl-1 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins_hs>;
Missing Linux mainline driver and document support? Maybe skip for now?
spi0m0_cs0_hs spi0m0_cs1_hs ???
> + status = "disabled";
> + };
> +
spi0 {
/omit-if-no-ref/
spi0m0_pins: spi0m0-pins {
rockchip,pins =
/* spi0_clkm0 */
<0 RK_PB5 2 &pcfg_pull_none>,
/* spi0_misom0 */
<0 RK_PC5 2 &pcfg_pull_none>,
/* spi0_mosim0 */
<0 RK_PB6 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
spi0m0_cs0: spi0m0-cs0 {
rockchip,pins =
/* spi0_cs0m0 */
<0 RK_PC6 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
spi0m0_cs1: spi0m0-cs1 {
rockchip,pins =
/* spi0_cs1m0 */
<0 RK_PC4 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
spi0m1_pins: spi0m1-pins {
rockchip,pins =
/* spi0_clkm1 */
<2 RK_PD3 3 &pcfg_pull_none>,
/* spi0_misom1 */
<2 RK_PD0 3 &pcfg_pull_none>,
/* spi0_mosim1 */
<2 RK_PD1 3 &pcfg_pull_none>;
};
/omit-if-no-ref/
spi0m1_cs0: spi0m1-cs0 {
rockchip,pins =
/* spi0_cs0m1 */
<2 RK_PD2 3 &pcfg_pull_none>;
};
};
spi0-hs {
/omit-if-no-ref/
spi0m0_pins_hs: spi0m0-pins {
rockchip,pins =
/* spi0_clkm0 */
<0 RK_PB5 2 &pcfg_pull_up_drv_level_1>,
/* spi0_misom0 */
<0 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
/* spi0_mosim0 */
<0 RK_PB6 2 &pcfg_pull_up_drv_level_1>;
};
/omit-if-no-ref/
spi0m0_cs0_hs: spi0m0-cs0 {
rockchip,pins =
/* spi0_cs0m0 */
<0 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
};
/omit-if-no-ref/
spi0m0_cs1_hs: spi0m0-cs1 {
rockchip,pins =
/* spi0_cs1m0 */
<0 RK_PC4 2 &pcfg_pull_up_drv_level_1>;
};
/omit-if-no-ref/
spi0m1_pins_hs: spi0m1-pins {
rockchip,pins =
/* spi0_clkm1 */
<2 RK_PD3 3 &pcfg_pull_up_drv_level_1>,
/* spi0_misom1 */
<2 RK_PD0 3 &pcfg_pull_up_drv_level_1>,
/* spi0_mosim1 */
<2 RK_PD1 3 &pcfg_pull_up_drv_level_1>;
};
/omit-if-no-ref/
spi0m1_cs0_hs: spi0m1-cs0 {
rockchip,pins =
/* spi0_cs0m1 */
<2 RK_PD2 3 &pcfg_pull_up_drv_level_1>;
};
};
> + spi1: spi@fe620000 {
> + compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> + reg = <0x0 0xfe620000 0x0 0x1000>;
> + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
> + clock-names = "spiclk", "apb_pclk";
> + dmas = <&dmac0 22>, <&dmac0 23>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "high_speed";
> + pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
> + pinctrl-1 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins_hs>;
> + status = "disabled";
> + };
> +
> + spi2: spi@fe630000 {
> + compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> + reg = <0x0 0xfe630000 0x0 0x1000>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
> + clock-names = "spiclk", "apb_pclk";
> + dmas = <&dmac0 24>, <&dmac0 25>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "high_speed";
> + pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
> + pinctrl-1 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins_hs>;
> + status = "disabled";
> + };
> +
> + spi3: spi@fe640000 {
> + compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
> + reg = <0x0 0xfe640000 0x0 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
> + clock-names = "spiclk", "apb_pclk";
> + dmas = <&dmac0 26>, <&dmac0 27>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "high_speed";
> + pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
> + pinctrl-1 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins_hs>;
> + status = "disabled";
> + };
> +
> uart1: serial@fe650000 {
> compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> reg = <0x0 0xfe650000 0x0 0x100>;
>
