Provide the two MIPI DSI encoders on the V3U and connect them to the DU accordingly. Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> --- v2 - Fixup indentation v3 - Fix the clock references - Fixup dsi1 as well -v4: - Use the correct pll clocks. This is still pending approval/integration of the DSI encoder bindings at [0] [0] https://lore.kernel.org/all/YQGFP%2FcFoSksPyn+@xxxxxxxxxxxxxxxxxxxxxxxxxx/ arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 64 +++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 483bb971c3ca..fdad8bc4a069 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -2622,12 +2622,76 @@ ports { port@0 { reg = <0>; du_out_dsi0: endpoint { + remote-endpoint = <&dsi0_in>; }; }; port@1 { reg = <1>; du_out_dsi1: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0 0xfed80000 0 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>; + clock-names = "fck", "dsi", "pll"; + + resets = <&cpg 415>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi1: dsi-encoder@fed90000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0 0xfed90000 0 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>; + clock-names = "fck", "dsi", "pll"; + + resets = <&cpg 416>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&du_out_dsi1>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { }; }; }; -- 2.30.2
