Re: [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/25/21 16:42, Arnd Bergmann wrote:
On Thu, Nov 25, 2021 at 10:14 PM Jesse Taube <mr.bossman075@xxxxxxxxx> wrote:

From: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>

Add generic i.MXRT family defconfig.

Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>

I see a lot of things in here that probably should not be part of the kernel,
either because they are rather obscure, or they take valuable memory:

---
  arch/arm/configs/imxrt_defconfig | 157 +++++++++++++++++++++++++++++++
  1 file changed, 157 insertions(+)
  create mode 100644 arch/arm/configs/imxrt_defconfig

diff --git a/arch/arm/configs/imxrt_defconfig b/arch/arm/configs/imxrt_defconfig
new file mode 100644
index 000000000000..d673745a5462
--- /dev/null
+++ b/arch/arm/configs/imxrt_defconfig
@@ -0,0 +1,157 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_USELIB=y

You almost certainly won't want USELIB, and SYSVIPC support
would only be useful for certain applications that you probably
won't run.

+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_PSI=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y

Probably nonen of these are helpful here.

+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y

Same for control groups overall as well as checkpoint_restore

+CONFIG_RELAY=y

There are a few drivers using CONFIG_RELAY, but I don't see you enable
any of them,
so this is not actually used.

this makes scene will change
+CONFIG_EXPERT=y

Are you losing anything without EXPERT? If not, remove that

+CONFIG_SGETMASK_SYSCALL=y
+# CONFIG_FUTEX is not set

Futex is probably one of the things you /do/ want.

There is a weird bug in futexs that reads from null_ptr, otherwise if you hard code that access isn't allowed it works. This seems to be a problem on other no-MMU platforms. I changed it to not have futexs like the stm32s, CONFIG_EXPERT is required for this option. If you want I can explain more about this but, i was going to do that as a separate patch.

+CONFIG_KALLSYMS_ALL=y
+CONFIG_PC104=y

Turning off KALLSYMS_ALL may save a noticeable amount of RAM.
Intresting

PC104 isn't actually that big, but it seems unlikely that you have
that hardware.

+CONFIG_PARAVIRT=y

You don't seem to enable XEN, so I don't think PARAVIRT is useful by itself.

+# CONFIG_ATAGS is not set
+CONFIG_CMDLINE="console=ttyS0 root=/dev/mmcblk0p2 rw earlycon rootwait"

The command line should come from the boot loader, users probably have
a different root device.
Presumably this will never be used but I have it there as an example for others, I can remove it if necessary.

+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_ZONED=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_SED_OPAL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y

I don't see you using OPAL or any of the 1990's partition formats.
ot set

+CONFIG_BINFMT_FLAT=y

For the defconfig, you should probably have ELF_FDPIC enabled,
not just FLAT.

+CONFIG_CLEANCACHE=y
+CONFIG_ZPOOL=y
+CONFIG_ZBUD=y
+CONFIG_Z3FOLD=y

Do these work as expected on NOMMU?

+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=65536

I don't think you can have a ramdisk larger than RAM ;-)

Oh that's funny I left that from testing something I will remove it.
+CONFIG_MEMORY=y

No need to enable the subsystem when you don't enable any
of its drivers.

+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y

Never use EXT3 on eMMC, just use EXT4 instead to make
the device actually live longer. You probably don't need to enable
EXT2 support separately.

+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_QUOTA=y

dnotify and locking seem more useful than quota here

+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y

+CONFIG_CONFIGFS_FS=y

I don't see anything using configfs

+CONFIG_LSM="yama,loadpin,integrity,apparmor"

None of these are actually enabled as far as I can tell.

+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y

If you use DWARF4, you probably want DEBUG_INFO_SPLIT as well,
to reduce the vmlinux size.

        Arnd

Thx for telling me about this i will try to use only the necessary ones.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux