To improve human readability and enable automatic validation, the tuples
in "interrupts-extended" properties should be grouped using angle
brackets. As the DT bindings lack an upper bound on the number of
interrupts, thus assuming one, proper grouping is currently flagged as
an error.
Fix this by adding the missing "maxItems", limiting it to 9 interrupts
(one interrupt for a system management core, and two interrupts per core
for other cores), which should be sufficient for now.
Group the tuples in the example.
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
.../interrupt-controller/sifive,plic-1.0.0.yaml | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 08d5a57ce00ff446..198b373f984f3438 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -61,6 +61,7 @@ properties:
interrupts-extended:
minItems: 1
+ maxItems: 9
description:
Specifies which contexts are connected to the PLIC, with "-1" specifying
that a context is not present. Each node pointed to should be a
@@ -89,12 +90,11 @@ examples:
#interrupt-cells = <1>;
compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
interrupt-controller;
- interrupts-extended = <
- &cpu0_intc 11
- &cpu1_intc 11 &cpu1_intc 9
- &cpu2_intc 11 &cpu2_intc 9
- &cpu3_intc 11 &cpu3_intc 9
- &cpu4_intc 11 &cpu4_intc 9>;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>;
reg = <0xc000000 0x4000000>;
riscv,ndev = <10>;
};
--
2.25.1
