The AD74412R and AD74413R are quad-channel software configurable input/output solutions for building and process control applications. They contain functionality for analog output, analog input, digital input, resistance temperature detector, and thermocouple measurements integrated into a single chip solution with an SPI interface. The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide four configurable input/output channels and a suite of diagnostic functions. The AD74413R differentiates itself from the AD74412R by being HART-compatible. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> --- .../bindings/iio/addac/adi,ad74413r.yaml | 153 ++++++++++++++++++ include/dt-bindings/iio/addac/adi,ad74413r.h | 21 +++ 2 files changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml create mode 100644 include/dt-bindings/iio/addac/adi,ad74413r.h diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml new file mode 100644 index 000000000000..d0134dd64b17 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD74412R/AD74413R device + +maintainers: + - Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> + +description: | + The AD74412R and AD74413R are quad-channel software configurable input/output + solutions for building and process control applications. They contain + functionality for analog output, analog input, digital input, resistance + temperature detector, and thermocouple measurements integrated + into a single chip solution with an SPI interface. + The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide + four configurable input/output channels and a suite of diagnostic functions. + The AD74413R differentiates itself from the AD74412R by being HART-compatible. + +properties: + compatible: + enum: + - adi,ad74412r + - adi,ad74413r + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 1000000 + + spi-cpol: true + + interrupts: + maxItems: 1 + + refin-supply: true + + adi,rsense-resistance-ohms: + description: + RSense resistance values in Ohms. + +required: + - compatible + - reg + - spi-max-frequency + - spi-cpol + - refin-supply + - adi,rsense-resistance-ohm + +additionalProperties: false + +patternProperties: + "^channel@[0-3]$": + type: object + description: Represents the external channels which are connected to the device. + + properties: + reg: + description: | + The channel number. It can have up to 4 channels numbered from 0 to 3. + minimum: 0 + maximum: 3 + + adi,ch-func: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Channel function. + HART functions are not supported on AD74412R. + 0 - CH_FUNC_HIGH_IMPEDANCE + 1 - CH_FUNC_VOLTAGE_OUTPUT + 2 - CH_FUNC_CURRENT_OUTPUT + 3 - CH_FUNC_VOLTAGE_INPUT + 4 - CH_FUNC_CURRENT_INPUT_EXT_POWER + 5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER + 6 - CH_FUNC_RESISTANCE_INPUT + 7 - CH_FUNC_DIGITAL_INPUT_LOGIC + 8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER + 9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART + 10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART + minimum: 0 + maximum: 10 + default: 0 + + adi,gpo-comparator: + type: boolean + description: | + Whether to configure GPO as a comparator or not. + When not configured as a comparator, the GPO will be treated as an + output-only GPIO. + + required: + - reg + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + status = "okay"; + + ad74413r@0 { + compatible = "adi,ad74413r"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio>; + interrupts = <26 0>; + + refin-supply = <&ad74413r_refin>; + adi,rsense-resistance-ohm = <100>; + + channel@0 { + reg = <0>; + + adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>; + }; + + channel@1 { + reg = <1>; + + adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>; + }; + + channel@2 { + reg = <2>; + + adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>; + adi,gpo-comparator; + }; + + channel@3 { + reg = <3>; + + adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>; + }; + }; + }; +... diff --git a/include/dt-bindings/iio/addac/adi,ad74413r.h b/include/dt-bindings/iio/addac/adi,ad74413r.h new file mode 100644 index 000000000000..a43b010f974f --- /dev/null +++ b/include/dt-bindings/iio/addac/adi,ad74413r.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_ADI_AD74413R_H +#define _DT_BINDINGS_ADI_AD74413R_H + +#define CH_FUNC_HIGH_IMPEDANCE 0x0 +#define CH_FUNC_VOLTAGE_OUTPUT 0x1 +#define CH_FUNC_CURRENT_OUTPUT 0x2 +#define CH_FUNC_VOLTAGE_INPUT 0x3 +#define CH_FUNC_CURRENT_INPUT_EXT_POWER 0x4 +#define CH_FUNC_CURRENT_INPUT_LOOP_POWER 0x5 +#define CH_FUNC_RESISTANCE_INPUT 0x6 +#define CH_FUNC_DIGITAL_INPUT_LOGIC 0x7 +#define CH_FUNC_DIGITAL_INPUT_LOOP_POWER 0x8 +#define CH_FUNC_CURRENT_INPUT_EXT_POWER_HART 0x9 +#define CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART 0xA + +#define CH_FUNC_MIN CH_FUNC_HIGH_IMPEDANCE +#define CH_FUNC_MAX CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART + +#endif /* _DT_BINDINGS_ADI_AD74413R_H */ -- 2.34.1
