Document the lan966x switch device driver bindings Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> --- .../net/microchip,lan966x-switch.yaml | 149 ++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml new file mode 100644 index 000000000000..9367491dd2d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Lan966x Ethernet switch controller + +maintainers: + - Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> + +description: | + The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with + two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs, + it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to + 2 Quad-SGMII/Quad-USGMII interfaces. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: microchip,lan966x-switch + + reg: + items: + - description: cpu target + - description: general control block target + + reg-names: + items: + - const: cpu + - const: gcb + + interrupts: + minItems: 1 + items: + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: xtr + - const: fdma + + resets: + items: + - description: Reset controller used for switch core reset (soft reset) + - description: Reset controller used for releasing the phy from reset + + reset-names: + items: + - const: switch + - const: phy + + ethernet-ports: + type: object + patternProperties: + "^port@[0-9a-f]+$": + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + reg: + description: + Switch port number + + phys: + description: + Phandle of a Ethernet SerDes PHY + + phy-mode: + description: + This specifies the interface used by the Ethernet SerDes towards + the PHY or SFP. + + phy-handle: + description: + Phandle of a Ethernet PHY. + + sfp: + description: + Phandle of an SFP. + + managed: true + + required: + - reg + - phys + - phy-mode + + oneOf: + - required: + - phy-handle + - required: + - sfp + - managed + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - resets + - reset-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr"; + resets = <&switch_reset 0>, <&phy_reset 0>; + reset-names = "switch", "phy"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phys = <&serdes 0 0>; + phy-mode = "gmii"; + }; + + port1: port@1 { + reg = <1>; + sfp = <&sfp_eth1>; + managed = "in-band-status"; + phys = <&serdes 2 4>; + phy-mode = "sgmii"; + }; + }; + }; + +... -- 2.33.0
