On Wednesday 13 August 2014 09:04 PM, Gabriel FERNANDEZ wrote: > The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe > or USB3 devices. > > Signed-off-by: alexandre torgue <alexandre.torgue@xxxxxx> > Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxx> > --- > .../devicetree/bindings/phy/phy-miphy28lp.txt | 126 +++++++++++++++++++++ > 1 file changed, 126 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt > new file mode 100644 > index 0000000..6e57bd5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt > @@ -0,0 +1,126 @@ > +STMicroelectronics STi MIPHY28LP PHY binding > +============================================ > + > +This binding describes a miphy device that is used to control PHY hardware > +for SATA, PCIe or USB3. > + > +Required properties (controller (parent) node): > +- compatible : Should be "st,miphy28lp-phy" > +- st,syscfg : Should be a phandle of the system configuration register group ^^^ I think here you used space and in the rest of places used tabs. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
