Hi All, On 22/11/21 6:26 pm, Aswath Govindraju wrote: > - The following series of patches add support for reading the state of the > mux to be set for enabling given device. > - As these are RFC patches I have combined them into a single series for > better understanding of the reason behind making this change. > > Changes since v1: > - Added support for reading the enable state from DT instead of hardcoding > the state to be set to 1. > - Made relavent changes in the bindings > > Link to v1, > - https://patchwork.kernel.org/project/linux-phy/list/?series=578863&state=* > > Aswath Govindraju (4): > dt-bindings: mux: Increase the number of arguments in mux-controls > dt-bindings: phy: ti,tcan104x-can: Document mux-controls property > mux: Add support for reading mux enable state from DT > phy: phy-can-transceiver: Add support for setting mux > Thank you for the comments. I have made changes based on the comments received and posted a v3 of this series. Regards, Aswath > .../devicetree/bindings/mux/gpio-mux.yaml | 2 +- > .../bindings/mux/mux-controller.yaml | 2 +- > .../bindings/phy/ti,tcan104x-can.yaml | 8 ++++++ > drivers/mux/core.c | 20 ++++++++++++-- > drivers/phy/phy-can-transceiver.c | 26 +++++++++++++++++++ > include/linux/mux/consumer.h | 1 + > include/linux/mux/driver.h | 1 + > 7 files changed, 56 insertions(+), 4 deletions(-) >
