Hi Sergey,
Thank you for the review.
On Mon, Nov 22, 2021 at 8:06 PM Sergey Shtylyov <s.shtylyov@xxxxxx> wrote:
>
> On 22.11.2021 2:49, Lad Prabhakar wrote:
>
> > Enable mt25qu512a flash connected to QSPI0.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v1->v2
> > -> Renamed qspi_pins0 to qspi0_pins
> > ---
> > .../boot/dts/renesas/rzg2l-smarc-som.dtsi | 40 +++++++++++++++++++
> > 1 file changed, 40 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
> > index 7e84a29dddfa..aef1b8736732 100644
> > --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
> > @@ -178,6 +178,18 @@
> > line-name = "gpio_sd0_pwr_en";
> > };
> >
> > + qspi0_pins: qspi0 {
> > + qspi0-data {
> > + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
> > + power-source = <1800>;
>
> Hrm, sorry for more nitpicking... Why 2 spaces before =?
>
Argh my bad...
> > + };
> > +
> > + qspi0-ctrl {
> > + pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
> > + power-source = <1800>;
>
> Here as well...
>
.. will fix that.
Cheers,
Prabhakar
> > + };
> > + };
> > +
> > /*
> > * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
> > * The below switch logic can be used to select the device between
> [...]
>
> MBR, Sergey
>
