Kukjin,
Am 04.08.2014 17:22, schrieb Doug Anderson:
> On Fri, Aug 1, 2014 at 5:52 PM, Andreas Färber <afaerber@xxxxxxx> wrote:
>> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
>> new file mode 100644
>> index 000000000000..f5566f84d885
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
[...]
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
>> + };
>
> Last I remember hearing about this, Julius said that the generic
> usb-hub driver didn't work right for asserting the reset line.
> Something about needing the reset at a very specific time in the USB
> enumeration, I think. Maybe it's somehow been fixed since then and
> that's why it's working?
>
> Also: you technically should have a pinctrl-0 and pinctrl-names
> referencing "hsic_reset" below to make sure the pin gets initted
> properly.
[...]
> Technically the missing pinctrl for hsic-reset is something that out
> to be fixed and we should figure out whether the reset line is
> actually working properly anyway. ...but I think this has been
> through enough spins and any additional fixup can happen later, so you
> can add my:
>
> Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
I wonder how to proceed now... Are you planning to continue inserting my
remaining snow/smdk/arndale refactoring patches [1,2,3,4] before the mmc
slot node refactoring on v3.18-next/dt-samsung branch?
I.e., should I send out a v7 rebasing either the remainder or just
Spring on top of your for-next, or should I just post new follow-up
patches to this series and wait?
I've prepared and successfully tested a patch adding the pinctrl Doug
requested above. Additionally, I have another follow-up ready, adding a
gmt,g781 temperature sensor (with v3.17-rc1 that actually works).
Also I understood that Javier is waiting for my remaining Snow bits to
be applied before sending out further Snow DT cleanups/fixes of his.
Thanks,
Andreas
[1] https://patchwork.kernel.org/patch/4664881/
[2] https://patchwork.kernel.org/patch/4664801/
[3] https://patchwork.kernel.org/patch/4664731/
[4] https://patchwork.kernel.org/patch/4664751/
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
