On Sat, Nov 20, 2021 at 1:19 AM Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote: > On 07/11/2021 07:56, Chunfeng Yun wrote: > > Add optional property nvmem-cells and nvmem-cell-names to support > > software efuse load, this helps to fix the efuse bit shift issue > > on mt8195 etc. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > > Applied thanks, This is a PHY DT binding change. Shouldn't it go in with patch 5, the phy driver patch, through the PHY tree instead? ChenYu > --srini > > > --- > > .../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++ > > 1 file changed, 18 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > index 9e6c0f43f1c6..05ee274b4b71 100644 > > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > @@ -160,6 +160,24 @@ patternProperties: > > - PHY_TYPE_PCIE > > - PHY_TYPE_SATA > > > > + nvmem-cells: > > + items: > > + - description: internal R efuse for U2 PHY or U3/PCIe PHY > > + - description: rx_imp_sel efuse for U3/PCIe PHY > > + - description: tx_imp_sel efuse for U3/PCIe PHY > > + description: | > > + Phandles to nvmem cell that contains the efuse data; > > + Available only for U2 PHY or U3/PCIe PHY of version 2/3, these > > + three items should be provided at the same time for U3/PCIe PHY, > > + when use software to load efuse; > > + If unspecified, will use hardware auto-load efuse. > > + > > + nvmem-cell-names: > > + items: > > + - const: intr > > + - const: rx_imp > > + - const: tx_imp > > + > > # The following optional vendor properties are only for debug or HQA test > > mediatek,eye-src: > > description: > > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-mediatek
