Re: [PATCH 3/3] arm64: dts: apple: t8103: Add i2c and cd321x nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sun, Nov 21, 2021, at 19:07, Janne Grunau wrote:
> i2c0, i2c1 and i2c3 are used on all M1 devices, i2c2 is only used on
> the 2020 Mac Mini and 13-inch MacBook Pro. All devices have identical
> i2c addresses for the cd321x' and use the same i2c bus.

This should really be two commits: One for the i2c nodes and the other
one to add the cd321x nodes.

>
> Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/apple/t8103-j274.dts  |  4 ++
>  arch/arm64/boot/dts/apple/t8103-j293.dts  |  4 ++
>  arch/arm64/boot/dts/apple/t8103-jxxx.dtsi | 18 ++++++
>  arch/arm64/boot/dts/apple/t8103.dtsi      | 73 +++++++++++++++++++++++
>  4 files changed, 99 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts 
> b/arch/arm64/boot/dts/apple/t8103-j274.dts
> index 9e01ef70039d..2cd429efba5b 100644
> --- a/arch/arm64/boot/dts/apple/t8103-j274.dts
> +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
> @@ -39,3 +39,7 @@ ethernet0: ethernet@0,0 {
>  		local-mac-address = [00 10 18 00 00 00];
>  	};
>  };
> +
> +&i2c2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts 
> b/arch/arm64/boot/dts/apple/t8103-j293.dts
> index 466035f00b69..a3b084d50da3 100644
> --- a/arch/arm64/boot/dts/apple/t8103-j293.dts
> +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
> @@ -31,3 +31,7 @@ &pcie0_dart_2 {
> 
>  /delete-node/ &port01;
>  /delete-node/ &port02;
> +
> +&i2c2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi 
> b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
> index 53d22b434d76..5f748f3f60d2 100644
> --- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
> +++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
> @@ -39,6 +39,24 @@ &serial0 {
>  	status = "okay";
>  };
> 
> +&i2c0 {
> +	hpm0: tps6598x@38 {
> +		compatible = "apple,cd321x";
> +		reg = <0x38>;
> +		interrupt-parent = <&pinctrl_ap>;
> +		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "irq";
> +	};
> +
> +	hpm1: tps6598x@3f {
> +		compatible = "apple,cd321x";
> +		reg = <0x3f>;
> +		interrupt-parent = <&pinctrl_ap>;
> +		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "irq";
> +	};
> +};
> +
>  /*
>   * Force the bus number assignments so that we can declare some of the
>   * on-board devices and properties that are populated by the bootloader
> diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi 
> b/arch/arm64/boot/dts/apple/t8103.dtsi
> index c320c8baeb41..6c6dd988bd60 100644
> --- a/arch/arm64/boot/dts/apple/t8103.dtsi
> +++ b/arch/arm64/boot/dts/apple/t8103.dtsi
> @@ -126,6 +126,59 @@ serial0: serial@235200000 {
>  			status = "disabled";
>  		};
> 
> +		i2c0: i2c@235010000 {
> +			compatible = "apple,t8103-i2c", "apple,i2c";
> +			reg = <0x2 0x35010000 0x0 0x4000>;
> +			clocks = <&clk24>;
> +			clock-names = "ref";

I don't think we need the clock name here.

> +			interrupt-parent = <&aic>;
> +			interrupts = <AIC_IRQ 627 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-0 = <&i2c0_pins>;
> +			pinctrl-names = "default";
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +		};
> +
> +		i2c1: i2c@235014000 {
> +			compatible = "apple,t8103-i2c", "apple,i2c";
> +			reg = <0x2 0x35014000 0x0 0x4000>;
> +			clocks = <&clk24>;
> +			clock-names = "ref";
> +			interrupt-parent = <&aic>;
> +			interrupts = <AIC_IRQ 628 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-0 = <&i2c1_pins>;
> +			pinctrl-names = "default";
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +		};
> +
> +		i2c2: i2c@235018000 {
> +			compatible = "apple,t8103-i2c", "apple,i2c";
> +			reg = <0x2 0x35018000 0x0 0x4000>;
> +			clocks = <&clk24>;
> +			clock-names = "ref";
> +			interrupt-parent = <&aic>;
> +			interrupts = <AIC_IRQ 628 IRQ_TYPE_LEVEL_HIGH>;

Shouldn't this be 629? 628 is already used for i2c1.

> +			pinctrl-0 = <&i2c2_pins>;
> +			pinctrl-names = "default";
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +			status = "disabled"; /* not used in all devices */
> +		};
> +
> +		i2c3: i2c@23501c000 {
> +			compatible = "apple,t8103-i2c", "apple,i2c";
> +			reg = <0x2 0x3501c000 0x0 0x4000>;
> +			clocks = <&clk24>;
> +			clock-names = "ref";
> +			interrupt-parent = <&aic>;
> +			interrupts = <AIC_IRQ 630 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-0 = <&i2c3_pins>;
> +			pinctrl-names = "default";
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +		};
> +
>  		aic: interrupt-controller@23b100000 {
>  			compatible = "apple,t8103-aic", "apple,aic";
>  			#interrupt-cells = <3>;
> @@ -153,6 +206,26 @@ pinctrl_ap: pinctrl@23c100000 {
>  				     <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
>  				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
> 
> +			i2c0_pins: i2c0-pins {
> +				pinmux = <APPLE_PINMUX(192, 1)>,
> +					 <APPLE_PINMUX(188, 1)>;
> +			};
> +
> +			i2c1_pins: i2c1-pins {
> +				pinmux = <APPLE_PINMUX(201, 1)>,
> +					 <APPLE_PINMUX(199, 1)>;
> +			};
> +
> +			i2c2_pins: i2c2-pins {
> +				pinmux = <APPLE_PINMUX(163, 1)>,
> +					 <APPLE_PINMUX(162, 1)>;
> +			};
> +
> +			i2c3_pins: i2c3-pins {
> +				pinmux = <APPLE_PINMUX(73, 1)>,
> +					 <APPLE_PINMUX(72, 1)>;
> +			};
> +
>  			pcie_pins: pcie-pins {
>  				pinmux = <APPLE_PINMUX(150, 1)>,
>  					 <APPLE_PINMUX(151, 1)>,
> -- 
> 2.34.0



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux