Re: [PATH v3 2/2] ath11k: Use reserved host DDR addresses from DT for PCI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Anilkumar Kolli <akolli@xxxxxxxxxxxxxx> writes:

> Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2)
> is reserved through DT entries for firmware usage. Send the base
> address from DT entries.
> If DT entry is available, PCI device will work with
> fixed_mem_region else host allocates multiple segments.
>
> IPQ8074 on HK10 board supports multiple PCI devices.
> IPQ8074 + QCN9074 is tested with this patch.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>

Not sure how I missed these in the last round:

> +static bool ath11k_mhi_read_addr_from_dt(struct mhi_controller *mhi_ctrl)

static int ....

> +{
> +	struct device_node *np;
> +	u32 reg[4];
> +	dma_addr_t start;
> +
> +	np = of_find_node_by_type(NULL, "memory");
> +	if (!np)
> +		return false;
> +
> +	if (of_property_read_u32_array(np, "reg", reg, 4))
> +		return false;

ret = of_property_read_u32_array(np, "reg", reg, 4);
if (ret)
	return ret;

> +	start = reg[0] + reg[1];
> +	mhi_ctrl->iova_start = start + 0x1000000;
> +	mhi_ctrl->iova_stop = start + reg[2] + reg[3];
> +
> +	return true;

return 0;

> +}
> +
>  int ath11k_mhi_register(struct ath11k_pci *ab_pci)
>  {
>  	struct ath11k_base *ab = ab_pci->ab;
> @@ -339,8 +360,14 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
>  		return ret;
>  	}
>  
> -	mhi_ctrl->iova_start = 0;
> -	mhi_ctrl->iova_stop = 0xffffffff;
> +	if ((test_bit(ATH11K_FLAG_FIXED_MEM_RGN, &ab->dev_flags))) {
> +		if (!ath11k_mhi_read_addr_from_dt(mhi_ctrl))
> +			return -ENODATA;

                ret = ath11k_mhi_read_addr_from_dt(mhi_ctrl);
		if (ret)
			return ret;

> @@ -1245,6 +1246,13 @@ static int ath11k_pci_probe(struct pci_dev *pdev,
>  	pci_set_drvdata(pdev, ab);
>  	spin_lock_init(&ab_pci->window_lock);
>  
> +	/* Set fixed_mem_region to true for platforms support reserved memory
> +	 * from DT. If memory is reserved from DT for FW, ath11k driver need not
> +	 * allocate memory.
> +	 */
> +	if (!of_property_read_u32(ab->dev->of_node, "memory-region", &addr))
> +		set_bit(ATH11K_FLAG_FIXED_MEM_RGN, &ab->dev_flags);

ret = of_property_read_u32(ab->dev->of_node, "memory-region", &addr);
if (!ret)
	set_bit(ATH11K_FLAG_FIXED_MEM_RGN, &ab->dev_flags);

>  static int ath11k_qmi_assign_target_mem_chunk(struct ath11k_base *ab)
>  {
> +	struct device *dev = ab->dev;
> +	struct device_node *hremote_node = NULL;
> +	phandle hremote_phandle;
> +	dma_addr_t start;
> +	u32 reg[4], size, host_ddr_sz;
>  	int i, idx;
>  
>  	for (i = 0, idx = 0; i < ab->qmi.mem_seg_count; i++) {
>  		switch (ab->qmi.target_mem[i].type) {
> +		case HOST_DDR_REGION_TYPE:
> +			if (of_property_read_u32(dev->of_node, "memory-region",
> +						 &hremote_phandle)) {
> +				ath11k_dbg(ab, ATH11K_DBG_QMI,
> +					   "qmi fail to get hremote phandle\n");
> +				return 0;
> +			}
> +
> +			hremote_node = of_find_node_by_phandle(hremote_phandle);
> +			if (!hremote_node) {
> +				ath11k_dbg(ab, ATH11K_DBG_QMI,
> +					   "qmi fail to get hremote_node\n");
> +				return 0;
> +			}
> +
> +			if (of_property_read_u32_array(hremote_node, "reg", reg, 4)) {
> +				ath11k_dbg(ab, ATH11K_DBG_QMI,
> +					   "qmi fail to get reg from hremote\n");
> +				return 0;
> +			}

ret = of_property_read_u32_array(hremote_node, "reg", reg, 4);
if (ret) {
	ath11k_dbg(ab, ATH11K_DBG_QMI,
		   "qmi fail to get reg from hremote\n");
	return 0;
}

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux