[PATCH 4/4] dmaengine: sun6i: Add support for the D1 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



So far it appears to match the configuration of the A100 variant.

Since D1 is a RISC-V chip, it does not meet any of the existing
dependencies for this driver, so relax the dependency somewhat.

Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

 drivers/dma/Kconfig     | 2 +-
 drivers/dma/sun6i-dma.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6bcdb4e6a0d1..1ab216054694 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -163,7 +163,7 @@ config DMA_SUN4I
 
 config DMA_SUN6I
 	tristate "Allwinner A31 SoCs DMA support"
-	depends on MACH_SUN6I || MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+	depends on ARCH_SUNXI || COMPILE_TEST
 	depends on RESET_CONTROLLER
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 8c7cce643cdc..795cce445532 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -1277,6 +1277,7 @@ static const struct of_device_id sun6i_dma_match[] = {
 	{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
 	{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
 	{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
+	{ .compatible = "allwinner,sun20i-d1-dma", .data = &sun50i_a100_dma_cfg },
 	{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
 	{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
 	{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux