VCC needs to be enabled before releasing the enable GPIO.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/ti-sn65dsi83.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
index 065610edc37a..54d18e82ed74 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
@@ -33,6 +33,7 @@
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
@@ -143,6 +144,7 @@ struct sn65dsi83 {
struct mipi_dsi_device *dsi;
struct drm_bridge *panel_bridge;
struct gpio_desc *enable_gpio;
+ struct regulator *vcc;
int dsi_lanes;
bool lvds_dual_link;
bool lvds_dual_link_even_odd_swap;
@@ -337,6 +339,12 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge,
u16 val;
int ret;
+ ret = regulator_enable(ctx->vcc);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to enable vcc\n");
+ return;
+ }
+
/* Deassert reset */
gpiod_set_value(ctx->enable_gpio, 1);
usleep_range(1000, 1100);
@@ -486,11 +494,16 @@ static void sn65dsi83_atomic_disable(struct drm_bridge *bridge,
struct drm_bridge_state *old_bridge_state)
{
struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
+ int ret;
/* Put the chip in reset, pull EN line low, and assure 10ms reset low timing. */
gpiod_set_value(ctx->enable_gpio, 0);
usleep_range(10000, 11000);
+ ret = regulator_disable(ctx->vcc);
+ if (ret)
+ dev_err(ctx->dev, "Failed to disable vcc: %i\n", ret);
+
regcache_mark_dirty(ctx->regmap);
}
@@ -599,6 +612,12 @@ static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
ctx->panel_bridge = panel_bridge;
+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->vcc),
+ "Failed to get supply 'vcc': %pe\n",
+ ERR_PTR(ret));
+
return 0;
}
--
2.25.1
