On 17/11/2021 19:21, Fabien Parent wrote:
Hi Matthias,
On Wed, Nov 17, 2021 at 6:33 PM Matthias Brugger <matthias.bgg@xxxxxxxxx> wrote:
On 10/11/2021 20:24, Fabien Parent wrote:
From: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
Add dpi node to mt8183.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba4584faca5a..7c283c0b68b5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1443,6 +1443,17 @@ dsi0: dsi@14014000 {
phy-names = "dphy";
};
+ dpi0: dpi@14015000 {
+ compatible = "mediatek,mt8183-dpi";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DPI_IF>,
+ <&mmsys CLK_MM_DPI_MM>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
We are missing the output port node, don't we?
The output port node is defined in: [PATCH 2/3] arm64: dts: mediatek:
mt8183-pumpkin: add HDMI support
Unlike MT8173, there is no HDMI IP in the MT8183 SoC.
Ok, I missed that because the thread is broken. Would you mind to just resend
the whole series?
Thanks,
Matthias
Regards,
Matthias
+ };
+
mutex: mutex@14016000 {
compatible = "mediatek,mt8183-disp-mutex";
reg = <0 0x14016000 0 0x1000>;
