Re: [PATCH v3 6/8] watchdog: Kconfig: fix help text indentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 11, 2021 at 11:58:50PM +0100, Luca Ceresoli wrote:
> Some entries indent their help text with 1 tab + 1 space or 1 tab only
> instead of 1 tab + 2 spaces. Add the missing spaces.
> 
> Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> Acked-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

> ---
> 
> Changes in v3: none
> ---
>  drivers/watchdog/Kconfig | 48 ++++++++++++++++++++--------------------
>  1 file changed, 24 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 9d222ba17ec6..a6d97f30325a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -680,10 +680,10 @@ config MAX77620_WATCHDOG
>  	depends on MFD_MAX77620 || COMPILE_TEST
>  	select WATCHDOG_CORE
>  	help
> -	 This is the driver for the Max77620 watchdog timer.
> -	 Say 'Y' here to enable the watchdog timer support for
> -	 MAX77620 chips. To compile this driver as a module,
> -	 choose M here: the module will be called max77620_wdt.
> +	  This is the driver for the Max77620 watchdog timer.
> +	  Say 'Y' here to enable the watchdog timer support for
> +	  MAX77620 chips. To compile this driver as a module,
> +	  choose M here: the module will be called max77620_wdt.
>  
>  config IMX2_WDT
>  	tristate "IMX2+ Watchdog"
> @@ -1440,26 +1440,26 @@ config TQMX86_WDT
>  	depends on X86
>  	select WATCHDOG_CORE
>  	help
> -	This is the driver for the hardware watchdog timer in the TQMX86 IO
> -	controller found on some of their ComExpress Modules.
> +	  This is the driver for the hardware watchdog timer in the TQMX86 IO
> +	  controller found on some of their ComExpress Modules.
>  
> -	To compile this driver as a module, choose M here; the module
> -	will be called tqmx86_wdt.
> +	  To compile this driver as a module, choose M here; the module
> +	  will be called tqmx86_wdt.
>  
> -	Most people will say N.
> +	  Most people will say N.
>  
>  config VIA_WDT
>  	tristate "VIA Watchdog Timer"
>  	depends on X86 && PCI
>  	select WATCHDOG_CORE
>  	help
> -	This is the driver for the hardware watchdog timer on VIA
> -	southbridge chipset CX700, VX800/VX820 or VX855/VX875.
> +	  This is the driver for the hardware watchdog timer on VIA
> +	  southbridge chipset CX700, VX800/VX820 or VX855/VX875.
>  
> -	To compile this driver as a module, choose M here; the module
> -	will be called via_wdt.
> +	  To compile this driver as a module, choose M here; the module
> +	  will be called via_wdt.
>  
> -	Most people will say N.
> +	  Most people will say N.
>  
>  config W83627HF_WDT
>  	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
> @@ -1745,10 +1745,10 @@ config BCM7038_WDT
>  	depends on HAS_IOMEM
>  	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
>  	help
> -	 Watchdog driver for the built-in hardware in Broadcom 7038 and
> -	 later SoCs used in set-top boxes.  BCM7038 was made public
> -	 during the 2004 CES, and since then, many Broadcom chips use this
> -	 watchdog block, including some cable modem chips.
> +	  Watchdog driver for the built-in hardware in Broadcom 7038 and
> +	  later SoCs used in set-top boxes.  BCM7038 was made public
> +	  during the 2004 CES, and since then, many Broadcom chips use this
> +	  watchdog block, including some cable modem chips.
>  
>  config IMGPDC_WDT
>  	tristate "Imagination Technologies PDC Watchdog Timer"
> @@ -2109,12 +2109,12 @@ config KEEMBAY_WATCHDOG
>  	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
>  	select WATCHDOG_CORE
>  	help
> -	 This option enable support for an In-secure watchdog timer driver for
> -	 Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
> -	 count unit. An interrupt will be triggered, when the count crosses
> -	 the threshold configured in the register.
> +	  This option enable support for an In-secure watchdog timer driver for
> +	  Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
> +	  count unit. An interrupt will be triggered, when the count crosses
> +	  the threshold configured in the register.
>  
> -	 To compile this driver as a module, choose M here: the
> -	 module will be called keembay_wdt.
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called keembay_wdt.
>  
>  endif # WATCHDOG



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux