Re: [PATCH v2 1/2] dt: bindings: add new DT entry for ath11k PCI device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 16 Nov 2021 22:30:57 +0530, Anilkumar Kolli wrote:
> Ath11k driver supports PCI devices such as QCN9074/QCA6390.
> Ath11k firmware uses host DDR memory. DT entry is used to reserve
> these host DDR memory regions, send these memory base
> addresses using DT entries.
> 
> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
> ---
> V2:
>   - Use reserved-memory (Rob)
> 
>  .../bindings/net/wireless/qcom,ath11k.yaml         | 48 ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:160.13-31: Warning (reg_format): /example-0/pcie0_rp:reg: property has invalid length (20 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:164.17-36: Warning (reg_format): /example-0/pcie0_rp/ath11k@0:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:170.13-31: Warning (reg_format): /example-0/pcie1_rp:reg: property has invalid length (20 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:174.17-36: Warning (reg_format): /example-0/pcie1_rp/ath11k@1:reg: property has invalid length (20 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:138.16-141.11: Warning (unit_address_vs_reg): /example-0/memory: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:159.28-167.11: Warning (unit_address_vs_reg): /example-0/pcie0_rp: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:169.28-177.11: Warning (unit_address_vs_reg): /example-0/pcie1_rp: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:163.32-166.15: Warning (avoid_default_addr_size): /example-0/pcie0_rp/ath11k@0: Relying on default #address-cells value
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:163.32-166.15: Warning (avoid_default_addr_size): /example-0/pcie0_rp/ath11k@0: Relying on default #size-cells value
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:173.32-176.15: Warning (avoid_default_addr_size): /example-0/pcie1_rp/ath11k@1: Relying on default #address-cells value
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dts:173.32-176.15: Warning (avoid_default_addr_size): /example-0/pcie1_rp/ath11k@1: Relying on default #size-cells value
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: reserved-memory: qcn9074_pcie0@51100000:reg:0: [0, 1360003072, 0, 55574528] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dt.yaml: reserved-memory: qcn9074_pcie1@54600000:reg:0: [0, 1415577600, 0, 55574528] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1555958

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux