On Mon, Nov 1, 2021 at 7:58 PM Richard Zhu <hongxing.zhu@xxxxxxx> wrote: > > Refer to the discussion [1] when try to enable i.MX8MM PCIe support, > one standalone PCIe PHY driver should be seperated from i.MX PCIe > driver when enable i.MX8MM PCIe support. > > This patch-set adds the standalone PCIe PHY driver suport[1-5], and i.MX8MM > PCIe support[6-8] to have whole view to review this patch-set. > > The PCIe works on i.MX8MM EVK board based the the blkctrl power driver > [2] and this patch-set. And tested by Tim and Marcel on the different > reference clock modes boards. > > [1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@xxxxxxxxxxxxxx/ > [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@xxxxxxxxxxxxxx/ > > Main changes v4 --> v5: > - Set the AUX_EN always 1b'1, thus it can fix the regression introduced in v4 > series on Marcel's board. > - Use the lower-case letter in the devicetreee refer to Marcel's comments. > - Since the default value of the deemphasis parameters are zero, only set > the deemphasis registers when the input paramters are none zero. > > Main changes v3 --> v4: > - Update the yaml to fix syntax error, add maxitems and drop description of phy > - Correct the clock name in PHY DT node. > - Squash the EVK board relalted dts changes into one patch, and drop the > useless dummy clock and gpio suffix in DT nodes. > - Add board specific de-emphasis parameters as DT properties. Thus each board > can specify its actual de-emphasis values. > - Update the commit log of PHY driver. > - Remove the useless codes from PCIe driver, since they are moved to PHY driver > - After the discussion and verification of the CLKREQ# configurations with Tim, > agree to add an optional boolean property "fsl,clkreq-unsupported", indicates > the CLKREQ# signal is hooked or not in HW designs. > - Add "Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>" tag, since > Marcel help to test the v3 patch-set. > > Main changes v2 --> v3: > - Regarding Lucas' comments. > - to have a whole view to review the patches, send out the i.MX8MM PCIe support too. > - move the PHY related bits manipulations of the GPR/SRC to standalone PHY driver. > - split the dts changes to SOC and board DT, and use the enum instead of raw value. > - update the license of the dt-binding header file. > > Changes v1 --> v2: > - Update the license of the dt-binding header file to make the license > compatible with dts files. > - Fix the dt_binding_check errors. > > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 +++ > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 95 ++++++++++++++++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 55 +++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 46 +++++++++++++++- > drivers/pci/controller/dwc/pci-imx6.c | 73 ++++++++++++++++++++++--- > drivers/phy/freescale/Kconfig | 9 ++++ > drivers/phy/freescale/Makefile | 1 + > drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 237 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > include/dt-bindings/phy/phy-imx8-pcie.h | 14 +++++ > 9 files changed, 528 insertions(+), 8 deletions(-) > > [PATCH v5 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the > [PATCH v5 2/8] dt-bindings: phy: Add imx8 pcie phy driver support > [PATCH v5 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name > [PATCH v5 4/8] arm64: dts: imx8mm: Add the pcie phy support > [PATCH v5 5/8] phy: freescale: pcie: Initialize the imx8 pcie > [PATCH v5 6/8] arm64: dts: imx8mm: Add the pcie support > [PATCH v5 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm > [PATCH v5 8/8] PCI: imx: Add the imx8mm pcie support Richard, Are you posting a v6 of this series or have we already missed the window for 5.16? Best regards, Tim
