Re: [PATCH v3] arm64: dts: qcom: sc7280: Add Display Port node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-11-02 16:44, Kuogee Hsieh wrote:
From: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>

Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---

Anyone has comments on this patch?


Changes in v2:
-- move fixes of dp_phy reg property to other patch

Changes in v3:
-- delete "qcom,sc7180-dp" from msm_dp node

arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 +++++++++++++++++++++++++++++++++++-
 1 file changed, 87 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index fb2f1506..4414abc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2709,8 +2709,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&dsi_phy 0>,
 				 <&dsi_phy 1>,
-				 <0>,
-				 <0>,
+			  	 <&dp_phy 0>,
+			  	 <&dp_phy 1>,
 				 <&edp_phy 0>,
 				 <&edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -2807,6 +2807,13 @@
 							remote-endpoint = <&edp_in>;
 						};
 					};
+
+					port@2 {
+                                                reg = <2>;
+ dpu_intf0_out: endpoint {
+
remote-endpoint = <&dp_in>;
+                                                };
+                                        };
 				};

 				mdp_opp_table: opp-table {
@@ -3018,6 +3025,78 @@

 				status = "disabled";
 			};
+
+			msm_dp: displayport-controller@ae90000 {
+				status = "disabled";
+				compatible = "qcom,sc7280-dp";
+
+				reg = <0 0x0ae90000 0 0x1400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names =	"core_iface",
+						"core_aux",
+						"ctrl_link",
+						"ctrl_link_iface",
+						"stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
 		};

 		pdc: interrupt-controller@b220000 {
@@ -3120,6 +3199,12 @@
 				bias-pull-up;
 			};

+			dp_hot_plug_det: dp-hot-plug-det {
+				pins = "gpio47";
+				function = "dp_hot";
+				bias-disable;
+                        };
+
 			qspi_clk: qspi-clk {
 				pins = "gpio14";
 				function = "qspi_clk";



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux