Re: [PATCH v5 12/22] arm64/dts: qcom: Use new compatibles for crypto nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vladimir,

On Fri, 12 Nov 2021 at 15:56, Vladimir Zapolskiy
<vladimir.zapolskiy@xxxxxxxxxx> wrote:
>
> Hi Bhupesh,
>
> On 11/10/21 12:59 PM, Bhupesh Sharma wrote:
> > Since we are using soc specific qce crypto IP compatibles
> > in the bindings now, use the same in the device tree files
> > which include the crypto nodes.
> >
> > Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
> >   arch/arm64/boot/dts/qcom/sdm845.dtsi  | 2 +-
> >   2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > index 933b56103a46..f477d026c949 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > @@ -204,7 +204,7 @@ cryptobam: dma-controller@704000 {
> >               };
> >
> >               crypto: crypto@73a000 {
> > -                     compatible = "qcom,crypto-v5.1";
> > +                     compatible = "qcom,ipq6018-qce";
> >                       reg = <0x0 0x0073a000 0x0 0x6000>;
> >                       clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
> >                               <&gcc GCC_CRYPTO_AXI_CLK>,
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 526087586ba4..8e7cbadff25a 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -2329,7 +2329,7 @@ cryptobam: dma-controller@1dc4000 {
> >               };
> >
> >               crypto: crypto@1dfa000 {
> > -                     compatible = "qcom,crypto-v5.4";
> > +                     compatible = "qcom,sdm845-qce";
> >                       reg = <0 0x01dfa000 0 0x6000>;
> >                       clocks = <&gcc GCC_CE1_AHB_CLK>,
> >                                <&gcc GCC_CE1_AXI_CLK>,
> >
>
> and in connection to my review comment on v5 11/22 there should be done
> similar changes for ipq8074.dtsi and msm8996.dtsi.

Ok, I will fix this in v6.

Thanks,
Bhupesh



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux