Add all the clock names that the GCC driver expects to get via DT, so that the
clock handles can be filled as the development progresses.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 7e0aa4c25094..3d0d80e61405 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -584,8 +584,30 @@ gcc: clock-controller@100000 {
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- clock-names = "bi_tcxo", "sleep_clk";
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "sleep_clk",
+ "pcie_0_pipe_clk",
+ "pcie_1_pipe_clk",
+ "ufs_card_rx_symbol_0_clk",
+ "ufs_card_rx_symbol_1_clk",
+ "ufs_card_tx_symbol_0_clk",
+ "ufs_phy_rx_symbol_0_clk",
+ "ufs_phy_rx_symbol_1_clk",
+ "ufs_phy_tx_symbol_0_clk",
+ "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+ "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
};
ipcc: mailbox@408000 {
--
2.33.1
