As shown in downstream DT[1], the System NoC of QCM2290 is modelled using 4 fab/noc devices: sys_noc + qup_virt + mmnrt_virt + mmrt_virt. Among those 3 virtual devices, qup is owned by RPM and has no regmap resource, while mmnrt and mmrt are owned by AP and share the same regmap as sys_noc. So it's logical to represent these virtual devices as child nodes of sys_noc in DT, so that such configuration can be supported with a couple of changes on qnoc_probe(): - If there are child nodes, populate them. - If the device descriptor has .regmap_cfg but there is no IOMEM resource for the device, use parent's regmap. [1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/scuba-bus.dtsi Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx> --- drivers/interconnect/qcom/icc-rpm.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c index 22a98c0b29af..2dfa79ba27bd 100644 --- a/drivers/interconnect/qcom/icc-rpm.c +++ b/drivers/interconnect/qcom/icc-rpm.c @@ -347,8 +347,13 @@ int qnoc_probe(struct platform_device *pdev) void __iomem *mmio; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) + if (!res) { + /* Try parent's regmap */ + qp->regmap = dev_get_regmap(dev->parent, NULL); + if (qp->regmap) + goto regmap_done; return -ENODEV; + } mmio = devm_ioremap_resource(dev, res); @@ -364,6 +369,7 @@ int qnoc_probe(struct platform_device *pdev) } } +regmap_done: ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks); if (ret) return ret; @@ -409,6 +415,10 @@ int qnoc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qp); + /* Populate child NoC devices if any */ + if (of_get_child_count(dev->of_node) > 0) + return of_platform_populate(dev->of_node, NULL, NULL, dev); + return 0; err: icc_nodes_remove(provider); -- 2.17.1
