[PATCH] arm64: dts: ti: k3-am64-main: add timesync router node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
multiplexers to provide selection of active CPTS time sync events for
routing to CPTS capable modules.

This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Signed-off-by: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 42d1d219a3fd..c9321a80353a 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -564,6 +564,14 @@ cpts@39000000 {
 		ti,cpts-ext-ts-inputs = <8>;
 	};
 
+	timesync_router: timesync-router@a40000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0xa40000 0x0 0x800>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000107ff>;
+	};
+
 	usbss0: cdns-usb@f900000{
 		compatible = "ti,am64-usb";
 		reg = <0x00 0xf900000 0x00 0x100>;
-- 
2.33.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux