Re: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Adam,

thanks for you work, I'll try and reply  about the GStreamer questions below, if
you have further question feel free to ask.

Le samedi 06 novembre 2021 à 13:37 -0500, Adam Ford a écrit :
> The i.MX8M has two Hantro video decoders, called G1 and G2 which appear
> to be related to the video decoders used on the i.MX8MQ, but because of
> how the Mini handles the power domains, the VPU driver does not need to
> handle all the functions, so a new compatible flag is required.
> 
> This is an RFC because I don't have functional video on my system yet,
> and I'm hoping there might be people who do and can help test this.
> I have only tested this far enough to see they enumerate and appear
> as /dev/videoX and /dev/mediaX devices.

I will check the patchset, but you need in the mini-variant to disable the G1
post processor, because this block was fused out. We didn't make it optional
from the start as according to the V1 of the TRM it was there, but that error
was corrected in V3.

> 
> I am also curious to know if/what gstreamer plugins are necessary.  In
> NXP's custom kernel, there are IMX-specific plugins, and I was hoping there
> would be more generic plugins that I can use to test.  I am hoping some
> of the linux-media experts might chime in on how to best test.

I will recommend using GStreamer 1.19.3 or main branch (GStreamer is now a
single git repo). You will then be able to test Hantro G1 decoding of MPEG2,
H264 and VP8. Remember that the related plugin depends on libgudev (a glib
binding of udev).

For the encoder, I believe only JPEG maybe supported, since this is all there is
mainline for RK3288 (and perhaps other RK). But this will need testing and
debugging as the G1 version is slightly newer on NXP SoC.

> 
> Lastly, I didn't update any device tree binding YAML files, because
> I know there have been some discussions about the power domains on the
> imx8mq, and I wasn't sure if the imx8mm should get a separate YAML file
> or if the existing one for te imx8mq should just be modified.
> 
> This will likely require the following series in order to apply correctly:
> https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=576407
> 
> Adam Ford (5):
>   media: hantro: Add support for i.MX8M Mini
>   arm64: dts: imx8mm:  Enable VPU-G1 and VPU-G2
>   media: hantro: Rename ROCKCHIP_VPU_ENC_FMT to HANTRO_VPU_ENC_FMT
>   media: hantro: Add H1 encoder support on i.MX8M Mini
>   arm64: dts: imx8mm:  Enable Hantro H1 Encoder
> 
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi     |  61 ++++++++
>  drivers/staging/media/hantro/hantro_drv.c     |   3 +
>  drivers/staging/media/hantro/hantro_hw.h      |  19 ++-
>  drivers/staging/media/hantro/imx8m_vpu_hw.c   | 143 ++++++++++++++++++
>  .../staging/media/hantro/rockchip_vpu_hw.c    |  26 ++--
>  5 files changed, 231 insertions(+), 21 deletions(-)
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux