Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 122b487f197b..a34812e91160 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -82,6 +82,15 @@ framebuffer_mem: memory@9d400000 {
no-map;
};
};
+
+ /*
+ * Until we hook up type-c detection, we
+ * have to stick with this. But it works.
+ */
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
};
&blsp1_uart2 {
@@ -98,6 +107,13 @@ voldown {
};
};
+&qusb2phy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1b_0p925>;
+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
&rpm_requests {
pm660l-regulators {
compatible = "qcom,rpm-pm660l-regulators";
@@ -403,3 +419,12 @@ &sdhc_2 {
&tlmm {
gpio-reserved-ranges = <8 4>;
};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+ extcon = <&extcon_usb>;
+};
--
2.33.1
