Re: [RFC PATCH v2 3/5] leds: trigger: add offload-phy-activity trigger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/7/21 4:24 PM, Ansuel Smith wrote:
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 33aba8defeab..14023e160ba1 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -164,4 +164,33 @@ config LEDS_TRIGGER_TTY
When build as a module this driver will be called ledtrig-tty. +config LEDS_OFFLOAD_TRIGGER_PHY_ACTIVITY
+	tristate "LED Offload Trigger for PHY Activity"
+	depends on LEDS_OFFLOAD_TRIGGERS
+	help
+	  This allows LEDs to be configured to run by hardware and offloaded

	                                    to be run

+	  based on some rules. The LED will blink or be on based on the PHY

Could "on" be changed to ON or "on" or 'on' here:    be ON based on the PHY

+	  Activity for example on packet receive or based on the link speed.


--
~Randy



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux