Specify that S11 (well, whole block of s8+s9+s10+s11) of pm8994 and S2
(s2 + s3) of pmi8994 are supplied by vph_pwr. While we are at it, add
regulator name to S11, so that is displayed as VDD_APCC in the system.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 7e7b416e7d21..9dbac589482b 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -633,6 +633,8 @@ &pm8994_mpps {
&pm8994_spmi_regulators {
qcom,saw-reg = <&saw3>;
+ vdd_s11-supply = <&vph_pwr>;
+
s9 {
qcom,saw-slave;
};
@@ -641,6 +643,7 @@ s10 {
};
s11 {
qcom,saw-leader;
+ regulator-name = "VDD_APCC";
regulator-always-on;
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
@@ -673,6 +676,8 @@ pinconf {
};
&pmi8994_spmi_regulators {
+ vdd_s2-supply = <&vph_pwr>;
+
vdd_gfx: s2@1700 {
reg = <0x1700 0x100>;
regulator-name = "VDD_GFX";
--
2.33.0
