Add driver support for HiSilicon Hi6421 voltage regulators. Two rules for regulator enabling are defined in hi6421 spec: 1) Between disable and enable of each regulator (LDOs or BUCKs), there must be a protection gap. Use @off_on_delay of regulator core to implement this. 2) No two regulators can be enabled at the same time. Use mutex in hi6421_regulator_pdata to ensure this. A protection gap of 100us is added into each LDO/BUCK's .enable_time. Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx> --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/hi6421-regulator.c | 657 +++++++++++++++++++++++++++++++++++ 3 files changed, 668 insertions(+) create mode 100644 drivers/regulator/hi6421-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 2dc8289..e6b98ed 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -240,6 +240,16 @@ config REGULATOR_GPIO and the platform has to provide a mapping of GPIO-states to target volts/amps. +config REGULATOR_HI6421 + tristate "HiSilicon Hi6421 PMIC voltage regulator support" + depends on MFD_HI6421_PMIC && OF + help + This driver provides support for the voltage regulators on the + HiSilicon Hi6421 PMU / Codec IC. + Hi6421 is a multi-function device which, on regulator part, provides + 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All + of them come with support to either ECO (idle) or sleep mode. + config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index aa4a6aa..5513e2c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o +obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c new file mode 100644 index 0000000..b0de92b --- /dev/null +++ b/drivers/regulator/hi6421-regulator.c @@ -0,0 +1,657 @@ +/* + * Device driver for regulators in Hi6421 IC + * + * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd. + * http://www.hisilicon.com + * Copyright (c) <2013-2014> Linaro Ltd. + * http://www.linaro.org + * + * Author: Guodong Xu <guodong.xu@xxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/hi6421-pmic.h> +#include <linux/delay.h> +#include <linux/time.h> + +/* + * struct hi6421_regulator_pdata - Hi6421 regulator data of platform device + * @lock: mutex to serialize regulator enable + */ +struct hi6421_regulator_pdata { + struct mutex lock; +}; + +/* + * struct hi6421_regulator_info - hi6421 regulator information + * @dev: device pointer + * @desc: regulator description + * @regulator: regulator device + * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep + * @eco_microamp: eco mode load upper limit (in mA), valid for LDOs only + * @valid_modes_mask: valid operating modes + */ +struct hi6421_regulator_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *regulator; + u8 mode_mask; + u32 eco_microamp; + unsigned int valid_modes_mask; +}; + +/* HI6421 regulators */ +enum hi6421_regulator_id { + HI6421_LDO0, + HI6421_LDO1, + HI6421_LDO2, + HI6421_LDO3, + HI6421_LDO4, + HI6421_LDO5, + HI6421_LDO6, + HI6421_LDO7, + HI6421_LDO8, + HI6421_LDO9, + HI6421_LDO10, + HI6421_LDO11, + HI6421_LDO12, + HI6421_LDO13, + HI6421_LDO14, + HI6421_LDO15, + HI6421_LDO16, + HI6421_LDO17, + HI6421_LDO18, + HI6421_LDO19, + HI6421_LDO20, + HI6421_LDOAUDIO, + HI6421_BUCK0, + HI6421_BUCK1, + HI6421_BUCK2, + HI6421_BUCK3, + HI6421_BUCK4, + HI6421_BUCK5, + HI6421_NUM_REGULATORS, +}; + +#define HI6421_REGULATOR_OF_MATCH(_name, id) \ +{ \ + .name = #_name, \ + .driver_data = (void *) HI6421_##id, \ +} + +static struct of_regulator_match hi6421_regulator_match[] = { + HI6421_REGULATOR_OF_MATCH(hi6421_vout0, LDO0), + HI6421_REGULATOR_OF_MATCH(hi6421_vout1, LDO1), + HI6421_REGULATOR_OF_MATCH(hi6421_vout2, LDO2), + HI6421_REGULATOR_OF_MATCH(hi6421_vout3, LDO3), + HI6421_REGULATOR_OF_MATCH(hi6421_vout4, LDO4), + HI6421_REGULATOR_OF_MATCH(hi6421_vout5, LDO5), + HI6421_REGULATOR_OF_MATCH(hi6421_vout6, LDO6), + HI6421_REGULATOR_OF_MATCH(hi6421_vout7, LDO7), + HI6421_REGULATOR_OF_MATCH(hi6421_vout8, LDO8), + HI6421_REGULATOR_OF_MATCH(hi6421_vout9, LDO9), + HI6421_REGULATOR_OF_MATCH(hi6421_vout10, LDO10), + HI6421_REGULATOR_OF_MATCH(hi6421_vout11, LDO11), + HI6421_REGULATOR_OF_MATCH(hi6421_vout12, LDO12), + HI6421_REGULATOR_OF_MATCH(hi6421_vout13, LDO13), + HI6421_REGULATOR_OF_MATCH(hi6421_vout14, LDO14), + HI6421_REGULATOR_OF_MATCH(hi6421_vout15, LDO15), + HI6421_REGULATOR_OF_MATCH(hi6421_vout16, LDO16), + HI6421_REGULATOR_OF_MATCH(hi6421_vout17, LDO17), + HI6421_REGULATOR_OF_MATCH(hi6421_vout18, LDO18), + HI6421_REGULATOR_OF_MATCH(hi6421_vout19, LDO19), + HI6421_REGULATOR_OF_MATCH(hi6421_vout20, LDO20), + HI6421_REGULATOR_OF_MATCH(hi6421_vout_audio, LDOAUDIO), + HI6421_REGULATOR_OF_MATCH(hi6421_buck0, BUCK0), + HI6421_REGULATOR_OF_MATCH(hi6421_buck1, BUCK1), + HI6421_REGULATOR_OF_MATCH(hi6421_buck2, BUCK2), + HI6421_REGULATOR_OF_MATCH(hi6421_buck3, BUCK3), + HI6421_REGULATOR_OF_MATCH(hi6421_buck4, BUCK4), + HI6421_REGULATOR_OF_MATCH(hi6421_buck5, BUCK5), +}; + +/* LDO 0, 4~7, 9~14, 16~20 have same voltage table. */ +static const unsigned int ldo_0_voltages[] = { + 1500000, 1800000, 2400000, 2500000, + 2600000, 2700000, 2850000, 3000000, +}; + +/* LDO 8, 15 have same voltage table. */ +static const unsigned int ldo_8_voltages[] = { + 1500000, 1800000, 2400000, 2600000, + 2700000, 2850000, 3000000, 3300000, +}; + +/* Ranges are sorted in ascending order. */ +static const struct regulator_linear_range ldo_audio_volt_range[] = { + REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000), + REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000), +}; + +static const unsigned int buck_3_voltages[] = { + 950000, 1050000, 1100000, 1117000, + 1134000, 1150000, 1167000, 1200000, +}; + +static const unsigned int buck_4_voltages[] = { + 1150000, 1200000, 1250000, 1350000, + 1700000, 1800000, 1900000, 2000000, +}; + +static const unsigned int buck_5_voltages[] = { + 1150000, 1200000, 1250000, 1350000, + 1600000, 1700000, 1800000, 1900000, +}; + +static const struct regulator_ops hi6421_ldo_ops; +static const struct regulator_ops hi6421_ldo_linear_ops; +static const struct regulator_ops hi6421_ldo_linear_range_ops; +static const struct regulator_ops hi6421_buck012_ops; +static const struct regulator_ops hi6421_buck345_ops; + +#define HI6421_LDO_ENABLE_TIME (350) +/* + * _id - LDO id name string + * v_table - voltage table + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * ecomask - eco mode mask + * ecoamp - eco mode load uppler limit in mA + */ +#define HI6421_LDO(_id, v_table, vreg, vmask, ereg, emask, \ + odelay, ecomask, ecoamp) \ + [HI6421_##_id] = { \ + .desc = { \ + .name = #_id, \ + .ops = &hi6421_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421_##_id, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(v_table), \ + .volt_table = v_table, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = ecomask, \ + .eco_microamp = ecoamp, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE), \ + } + +/* HI6421 LDO1~3 are linear voltage regulators at fixed uV_step + * + * _id - LDO id name string + * _min_uV - minimum voltage supported in uV + * n_volt - number of votages available + * vstep - voltage increase in each linear step in uV + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * ecomask - eco mode mask + * ecoamp - eco mode load uppler limit in mA + */ +#define HI6421_LDO_LINEAR(_id, _min_uV, n_volt, vstep, vreg, vmask, \ + ereg, emask, odelay, ecomask, ecoamp) \ + [HI6421_##_id] = { \ + .desc = { \ + .name = #_id, \ + .ops = &hi6421_ldo_linear_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421_##_id, \ + .owner = THIS_MODULE, \ + .min_uV = _min_uV, \ + .n_voltages = n_volt, \ + .uV_step = vstep, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = ecomask, \ + .eco_microamp = ecoamp, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE), \ + } + +/* HI6421 LDOAUDIO is a linear voltage regulator with two 4-step ranges + * + * _id - LDO id name string + * n_volt - number of votages available + * volt_ranges - array of regulator_linear_range + * vstep - voltage increase in each linear step in uV + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * ecomask - eco mode mask + * ecoamp - eco mode load uppler limit in mA + */ +#define HI6421_LDO_LINEAR_RANGE(_id, n_volt, volt_ranges, vreg, vmask, \ + ereg, emask, odelay, ecomask, ecoamp) \ + [HI6421_##_id] = { \ + .desc = { \ + .name = #_id, \ + .ops = &hi6421_ldo_linear_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421_##_id, \ + .owner = THIS_MODULE, \ + .n_voltages = n_volt, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = ecomask, \ + .eco_microamp = ecoamp, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE), \ + } + +/* HI6421 BUCK0/1/2 are linear voltage regulators at fixed uV_step + * + * _id - BUCK0/1/2 id name string + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * sleepmask - mask of sleep mode + * etime - enable time + * odelay - off/on delay time in uS + */ +#define HI6421_BUCK012(_id, vreg, vmask, ereg, emask, sleepmask, \ + etime, odelay) \ + [HI6421_##_id] = { \ + .desc = { \ + .name = #_id, \ + .ops = &hi6421_buck012_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421_##_id, \ + .owner = THIS_MODULE, \ + .min_uV = 700000, \ + .n_voltages = 128, \ + .uV_step = 7086, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = etime, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = sleepmask, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_STANDBY), \ + } + +/* HI6421 BUCK3/4/5 share similar configurations as LDOs, with exception + * that it supports SLEEP mode, so has different .ops. + * + * _id - LDO id name string + * v_table - voltage table + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * sleepmask - mask of sleep mode + */ +#define HI6421_BUCK345(_id, v_table, vreg, vmask, ereg, emask, \ + odelay, sleepmask) \ + [HI6421_##_id] = { \ + .desc = { \ + .name = #_id, \ + .ops = &hi6421_buck345_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421_##_id, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(v_table), \ + .volt_table = v_table, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = sleepmask, \ + .valid_modes_mask = (REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_STANDBY), \ + } + +/* HI6421 regulator information */ +static struct hi6421_regulator_info + hi6421_regulator_info[HI6421_NUM_REGULATORS] = { + HI6421_LDO(LDO0, ldo_0_voltages, 0x20, 0x07, 0x20, 0x10, + 10000, 0x20, 8000), + HI6421_LDO_LINEAR(LDO1, 1700000, 4, 100000, 0x21, 0x03, 0x21, 0x10, + 10000, 0x20, 5000), + HI6421_LDO_LINEAR(LDO2, 1050000, 8, 50000, 0x22, 0x07, 0x22, 0x10, + 20000, 0x20, 8000), + HI6421_LDO_LINEAR(LDO3, 1050000, 8, 50000, 0x23, 0x07, 0x23, 0x10, + 20000, 0x20, 8000), + HI6421_LDO(LDO4, ldo_0_voltages, 0x24, 0x07, 0x24, 0x10, + 20000, 0x20, 8000), + HI6421_LDO(LDO5, ldo_0_voltages, 0x25, 0x07, 0x25, 0x10, + 20000, 0x20, 8000), + HI6421_LDO(LDO6, ldo_0_voltages, 0x26, 0x07, 0x26, 0x10, + 20000, 0x20, 8000), + HI6421_LDO(LDO7, ldo_0_voltages, 0x27, 0x07, 0x27, 0x10, + 20000, 0x20, 5000), + HI6421_LDO(LDO8, ldo_8_voltages, 0x28, 0x07, 0x28, 0x10, + 20000, 0x20, 8000), + HI6421_LDO(LDO9, ldo_0_voltages, 0x29, 0x07, 0x29, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO10, ldo_0_voltages, 0x2a, 0x07, 0x2a, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO11, ldo_0_voltages, 0x2b, 0x07, 0x2b, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO12, ldo_0_voltages, 0x2c, 0x07, 0x2c, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO13, ldo_0_voltages, 0x2d, 0x07, 0x2d, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO14, ldo_0_voltages, 0x2e, 0x07, 0x2e, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO15, ldo_8_voltages, 0x2f, 0x07, 0x2f, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO16, ldo_0_voltages, 0x30, 0x07, 0x30, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO17, ldo_0_voltages, 0x31, 0x07, 0x31, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO18, ldo_0_voltages, 0x32, 0x07, 0x32, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO19, ldo_0_voltages, 0x33, 0x07, 0x33, 0x10, + 40000, 0x20, 8000), + HI6421_LDO(LDO20, ldo_0_voltages, 0x34, 0x07, 0x34, 0x10, + 40000, 0x20, 8000), + HI6421_LDO_LINEAR_RANGE(LDOAUDIO, 8, ldo_audio_volt_range, 0x36, + 0x70, 0x36, 0x01, 40000, 0x02, 5000), + HI6421_BUCK012(BUCK0, 0x0d, 0x7f, 0x0c, 0x01, 0x10, 400, 20000), + HI6421_BUCK012(BUCK1, 0x0f, 0x7f, 0x0e, 0x01, 0x10, 400, 20000), + HI6421_BUCK012(BUCK2, 0x11, 0x7f, 0x10, 0x01, 0x10, 350, 100), + HI6421_BUCK345(BUCK3, buck_3_voltages, 0x13, 0x07, 0x12, 0x01, + 20000, 0x10), + HI6421_BUCK345(BUCK4, buck_4_voltages, 0x15, 0x07, 0x14, 0x01, + 20000, 0x10), + HI6421_BUCK345(BUCK5, buck_5_voltages, 0x17, 0x07, 0x16, 0x01, + 20000, 0x10), +}; + +static int hi6421_regulator_enable(struct regulator_dev *rdev) +{ + struct hi6421_regulator_pdata *pdata; + + pdata = dev_get_drvdata(rdev->dev.parent); + /* hi6421 spec requires regulator enablement must be serialized: + * - Because when BUCK, LDO switching from off to on, it will have + * a huge instantaneous current; so you can not turn on two or + * more LDO or BUCKs simultaneously, or it may burn the chip. + */ + mutex_lock(&pdata->lock); + + /* call regulator regmap helper */ + regulator_enable_regmap(rdev); + + mutex_unlock(&pdata->lock); + return 0; +} + +static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev) +{ + struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + u32 reg_val; + + regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); + if (reg_val & info->mode_mask) + return REGULATOR_MODE_IDLE; + + return REGULATOR_MODE_NORMAL; +} + +static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev) +{ + struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + u32 reg_val; + + regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); + if (reg_val & info->mode_mask) + return REGULATOR_MODE_STANDBY; + + return REGULATOR_MODE_NORMAL; +} + +static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + u32 new_mode; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + new_mode = 0; + break; + case REGULATOR_MODE_IDLE: + new_mode = info->mode_mask; + break; + default: + return -EINVAL; + } + + /* set mode */ + regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + info->mode_mask, new_mode); + + return 0; +} + +static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + u32 new_mode; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + new_mode = 0; + break; + case REGULATOR_MODE_STANDBY: + new_mode = info->mode_mask; + break; + default: + return -EINVAL; + } + + /* set mode */ + regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + info->mode_mask, new_mode); + + return 0; +} + +unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev, + int input_uV, int output_uV, int load_uA) +{ + struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); + + if (load_uA > info->eco_microamp) + return REGULATOR_MODE_NORMAL; + + return REGULATOR_MODE_IDLE; +} + +static const struct regulator_ops hi6421_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = hi6421_regulator_enable, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421_regulator_ldo_get_mode, + .set_mode = hi6421_regulator_ldo_set_mode, + .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode, +}; + +static const struct regulator_ops hi6421_ldo_linear_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = hi6421_regulator_enable, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421_regulator_ldo_get_mode, + .set_mode = hi6421_regulator_ldo_set_mode, + .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode, +}; + +static const struct regulator_ops hi6421_ldo_linear_range_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = hi6421_regulator_enable, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421_regulator_ldo_get_mode, + .set_mode = hi6421_regulator_ldo_set_mode, + .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode, +}; + +static const struct regulator_ops hi6421_buck012_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = hi6421_regulator_enable, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421_regulator_buck_get_mode, + .set_mode = hi6421_regulator_buck_set_mode, +}; + +static const struct regulator_ops hi6421_buck345_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = hi6421_regulator_enable, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421_regulator_buck_get_mode, + .set_mode = hi6421_regulator_buck_set_mode, +}; + +static int hi6421_regulator_register(struct platform_device *pdev, + struct regmap *rmap, + struct regulator_init_data *init_data, + int id, struct device_node *np) +{ + struct hi6421_regulator_info *info = NULL; + struct regulator_config config = { }; + + /* assign per-regulator data */ + info = &hi6421_regulator_info[id]; + info->dev = &pdev->dev; + + config.dev = &pdev->dev; + config.init_data = init_data; + config.driver_data = info; + config.regmap = rmap; + config.of_node = np; + + /* register regulator with framework */ + info->regulator = devm_regulator_register(&pdev->dev, &info->desc, + &config); + if (IS_ERR(info->regulator)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(info->regulator); + } + + return 0; +} + +static int hi6421_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np; + struct hi6421_pmic *pmic; + struct hi6421_regulator_pdata *pdata; + int i, ret = 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + mutex_init(&pdata->lock); + platform_set_drvdata(pdev, pdata); + + np = of_get_child_by_name(dev->parent->of_node, "regulators"); + if (!np) + return -ENODEV; + + ret = of_regulator_match(dev, np, + hi6421_regulator_match, + ARRAY_SIZE(hi6421_regulator_match)); + of_node_put(np); + if (ret < 0) { + dev_err(dev, "Error parsing regulator init data: %d\n", ret); + return ret; + } + + pmic = dev_get_drvdata(dev->parent); + + for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) { + ret = hi6421_regulator_register(pdev, pmic->regmap, + hi6421_regulator_match[i].init_data, i, + hi6421_regulator_match[i].of_node); + if (ret) + return ret; + } + + return 0; +} + +static struct platform_driver hi6421_regulator_driver = { + .driver = { + .name = "hi6421-regulator", + .owner = THIS_MODULE, + }, + .probe = hi6421_regulator_probe, +}; +module_platform_driver(hi6421_regulator_driver); + +MODULE_AUTHOR("Guodong Xu <guodong.xu@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Hi6421 regulator driver"); +MODULE_LICENSE("GPL v2"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
