Re: [PATCH 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 01, 2021 at 03:48:22PM +0800, hammer.hsieh wrote:
> Add bindings doc for Sunplus SoC UART Driver
> 
> Signed-off-by: hammer.hsieh <hammer.hsieh@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/serial/sunplus,uart.yaml   | 116 +++++++++++++++++++++
>  MAINTAINERS                                        |   5 +
>  2 files changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/sunplus,uart.yaml
> 
> diff --git a/Documentation/devicetree/bindings/serial/sunplus,uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,uart.yaml
> new file mode 100644
> index 0000000..f2ca9ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/sunplus,uart.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) Sunplus Co., Ltd. 2021
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/serial/sunplus,uart.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Sunplus SoC UART Controller Device Tree Bindings
> +
> +maintainers:
> +  - Tony Huang <tony.huang@xxxxxxxxxxx>
> +  - Hammer Hsieh <hammer.hsieh@xxxxxxxxxxx>
> +  - Wells Lu <wells.lu@xxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: serial.yaml#
> +
> +properties:
> +  compatible:
> +    const: sunplus,sp7021-uart
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    oneOf:
> +      - items:
> +        - const: UADMA
> +        - const: PERI0
> +      - items:
> +        - const: UADMA
> +        - const: PERI1

These 2 can be:

items:
  - const UADMA
  - pattern: '^PERI[0-1]$'

But why the difference for only one model of UART? The names should 
reflect the function of the clock. 

> +      - items:
> +        - const: HWUA
> +        - const: PERI0
> +      - items:
> +        - const: HWUA
> +        - const: PERI1
> +
> +  resets:
> +    maxItems: 1
> +
> +  which-uart:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 1, 2, 3, 4]

What's this for? Looks like an index and we don't do indices in DT. 
There is 'aliases' though.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/sp-sp7021.h>
> +    #include <dt-bindings/reset/sp-sp7021.h>
> +    aliases {
> +            serial0 = &uart0;
> +            serial1 = &uart1;
> +            serial10 = &uartdmarx0;
> +            serial20 = &uartdmatx0;
> +    };
> +
> +    uart0: serial@9c000900 {
> +      compatible = "sunplus,sp7021-uart";
> +      reg = <0x9c000900 0x80>;
> +      interrupt-parent = <&intc>;
> +      interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&clkc UA0>;

The schema says you must have 2 clocks.

> +      resets = <&rstc RST_UA0>;
> +    };
> +
> +    // UART1 PIO mode
> +    uart1: serial@9c000980 {
> +        compatible = "sunplus,sp7021-uart";
> +        reg = <0x9c000980 0x80>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clkc UA1>;
> +        resets = <&rstc RST_UA1>;
> +    };
> +
> +    // UART1 DMA mode for RX
> +    uartdmarx0: serial@9c008980 {
> +        compatible = "sunplus,sp7021-uart";
> +        reg = <0x9c008980 0x40>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <138 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clkc UADMA>, <&clkc PERI0>;
> +        clock-names = "UADMA", "PERI0";
> +        resets = <&rstc RST_UADMA>;
> +        which-uart = <1>;
> +    };
> +
> +    // UART1 DMA mode for TX
> +    uartdmatx0: serial@9c008a00 {
> +        compatible = "sunplus,sp7021-uart";
> +        reg = <0x9c008a00 0x40>, <0x9c008880 0x80>;
> +        clocks = <&clkc HWUA>, <&clkc PERI0>;
> +        clock-names = "HWUA", "PERI0";
> +        resets = <&rstc RST_HWUA>;
> +        which-uart = <1>;
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3b79fd4..f863e97 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17945,6 +17945,11 @@ L:	netdev@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	drivers/net/ethernet/dlink/sundance.c
>  
> +SUNPLUS UART DRIVER
> +M:	Hammer Hsieh <hammer.hsieh@xxxxxxxxxxx>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/serial/sunplus,uart.yaml
> +
>  SUPERH
>  M:	Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
>  M:	Rich Felker <dalias@xxxxxxxx>
> -- 
> 2.7.4
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux