On Mon, Aug 18, 2014 at 09:56:55AM +0100, Xiubo Li wrote: > Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx> > --- > > This is depended on the following regmap framework patches, which have > just been merged into linux-next tree: > > https://lkml.org/lkml/2014/7/15/6 > https://lkml.org/lkml/2014/7/15/5 > https://lkml.org/lkml/2014/7/15/7 > > > > > > > Documentation/devicetree/bindings/sound/fsl,asrc.txt | 10 +++++++--- > sound/soc/fsl/fsl_asrc.c | 6 +----- > 2 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt > index b93362a..791f372 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt > +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt > @@ -26,9 +26,12 @@ Required properties: > "ipg" Peripheral clock to driver module. > "asrck_<0-f>" Clock sources for input and output clock. > > - - big-endian : If this property is absent, the little endian mode > - will be in use as default. Otherwise, the big endian > - mode will be in use for all the device registers. > + - big-endian : If this property is absent, the native endian mode > + (same with CPU) will be in use as default. Otherwise, > + the big endian mode will be in use for all the device > + registers. > + See Documentation/devicetree/bindings/regmap/regmap.txt > + for more detail. Why does this have to change the semantics of the DT binding? Mark. > > - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends. > > @@ -56,5 +59,6 @@ asrc: asrc@02034000 { > "txa", "txb", "txc"; > fsl,asrc-rate = <48000>; > fsl,asrc-width = <16>; > + big-endian; > status = "okay"; > }; > diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c > index 8221104..3b14531 100644 > --- a/sound/soc/fsl/fsl_asrc.c > +++ b/sound/soc/fsl/fsl_asrc.c > @@ -684,7 +684,7 @@ static bool fsl_asrc_writeable_reg(struct device *dev, unsigned int reg) > } > } > > -static struct regmap_config fsl_asrc_regmap_config = { > +static const struct regmap_config fsl_asrc_regmap_config = { > .reg_bits = 32, > .reg_stride = 4, > .val_bits = 32, > @@ -802,10 +802,6 @@ static int fsl_asrc_probe(struct platform_device *pdev) > > asrc_priv->paddr = res->start; > > - /* Register regmap and let it prepare core clock */ > - if (of_property_read_bool(np, "big-endian")) > - fsl_asrc_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG; > - > asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs, > &fsl_asrc_regmap_config); > if (IS_ERR(asrc_priv->regmap)) { > -- > 1.8.5 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
