MSM DSI host driver actually parses "data-lanes" in DT and compare
it with the number of DSI lanes the bridge driver sets for
mipi_dsi_device. So we need to always specify "data-lanes" for the
DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
fragment, but missing in parade-ps8640 dts fragment, which requires
a fixup.
Since we'll do 4-lane DSI regardless of which bridge chip is used,
instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
Signed-off-by: Philip Chen <philipchen@xxxxxxxxxxxx>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 1 -
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index 6dbf413e4e5b..f869e6a343c1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -9,7 +9,6 @@
&dsi0_out {
remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
};
edp_brij_i2c: &i2c2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d4f4441179fc..bd5909ffb3dc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -603,6 +603,10 @@ &dsi0 {
vdda-supply = <&vdda_mipi_dsi0_1p2>;
};
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
&dsi_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi0_pll>;
--
2.33.1.1089.g2158813163f-goog
