On Sat, Oct 9, 2021 at 11:27 AM Adam Ford <aford173@xxxxxxxxx> wrote: > > The blk-ctrl and the GPCv2 in the i.MX8MN is similar but slightly different to that > of the i.MX8MM. This series is based on work from Lucas Stach for i.MX8MM, but > adapted for i.MX8MN. With the additional power domains and blk-ctrl enabled, > additional peripherals like gpu and USB can be enabled. > > V2: Add mising patches for expanding GPCv2 which are necessary > to make the blk-ctl operate. > Fix clk names > Fix missing references to structures in blk-ctl driver to link > them to the device tree. > I know Rob had some feedback on the DT bindings updates. I can address them in V3, I was hoping to get some feedback from this series from others who may be interested. I don't know if it's too late to get this into 5.16 or not, but I'll submit a V3 this weekend. adam > Adam Ford (9): > soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled > soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn > dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains > dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl > arm64: dts: imx8mn: add GPC node > arm64: dts: imx8mn: put USB controller into power-domains > arm64: dts: imx8mn: add DISP blk-ctrl > arm64: dts: imx8mn: Enable GPU > > .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 103 ++++++++++++++++++ > drivers/soc/imx/gpcv2.c | 26 +++++ > drivers/soc/imx/imx8m-blk-ctrl.c | 75 ++++++++++++- > include/dt-bindings/power/imx8mn-power.h | 5 + > 5 files changed, 305 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml > > -- > 2.25.1 >
