RE: [PATCH] spi: fsl-dspi: Convert to use regmap framework's endianness method.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Xiubo Li [mailto:Li.Xiubo@xxxxxxxxxxxxx]
> Sent: 2014年8月18日 15:48
> To: broonie@xxxxxxxxxx; Fu Chao-B44548
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-spi@xxxxxxxxxxxxxxx; Xiubo Li-
> B47053
> Subject: [PATCH] spi: fsl-dspi: Convert to use regmap framework's
> endianness method.
> 
> Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
> Cc: Chao Fu <b44548@xxxxxxxxxxxxx>
> ---
> 

Acked-by: Chao Fu <B44548@xxxxxxxxxxxxx>
Thank you!

 
> This is depended on the following patches, which has been applied into
> Regmap-Tree:
> https://lkml.org/lkml/2014/7/15/6
> https://lkml.org/lkml/2014/7/15/5
> https://lkml.org/lkml/2014/7/15/7
> 
> 
> 
> 
>  Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 7 ++++++-
>  drivers/spi/spi-fsl-dspi.c                             | 3 ---
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
> b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
> index 5376de4..cbbe16e 100644
> --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
> @@ -10,7 +10,12 @@ Required properties:
>  - pinctrl-names: must contain a "default" entry.
>  - spi-num-chipselects : the number of the chipselect signals.
>  - bus-num : the slave chip chipselect signal number.
> -- big-endian : if DSPI modudle is big endian, the bool will be set in
> node.
> +
> +Optional property:
> +- big-endian: If present the dspi device's registers are implemented
> +  in big endian mode, otherwise in native mode(same with CPU), for more
> +  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
> +
>  Example:
> 
>  dspi0@4002c000 {
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index 5021ddf..ebc4d1f 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -493,9 +493,6 @@ static int dspi_probe(struct platform_device *pdev)
>  	}
> 
>  	dspi_regmap_config.lock_arg = dspi;
> -	dspi_regmap_config.val_format_endian =
> -		of_property_read_bool(np, "big-endian")
> -			? REGMAP_ENDIAN_BIG : REGMAP_ENDIAN_DEFAULT;
>  	dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base,
>  						&dspi_regmap_config);
>  	if (IS_ERR(dspi->regmap)) {
> --
> 1.8.5

?韬{.n?????%??檩??w?{.n????z谵{???塄}?财??j:+v??????2??璀??摺?囤??z夸z罐?+?????w棹f





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux