Add the PCIe PHY support on iMX8MM platforms.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..0844f3144887 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1135,6 +1135,19 @@ usbmisc2: usbmisc@32e50200 {
reg = <0x32e50200 0x200>;
};
+ pcie_phy: pcie-phy@32f00000 {
+ compatible = "fsl,imx8mm-pcie-phy";
+ reg = <0x32f00000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ clock-names = "ref";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ assigned-clock-rates = <100000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY>;
+ reset-names = "pciephy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
dma_apbh: dma-controller@33000000 {
--
2.25.1
