Add the UART definitions needed to support earlyprintk for MesonX SoCs on UARTAO. Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx> --- arch/arm/Kconfig.debug | 14 ++++++++++++-- arch/arm/include/debug/meson.S | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 arch/arm/include/debug/meson.S diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b11ad54..16079c5 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -348,6 +348,13 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_MESON_UARTAO + bool "Kernel low-level debugging via Meson6 UARTAO" + depends on ARCH_MESON + help + Say Y here if you want kernel low-lever debugging support + on Amlogic Meson6 based platforms on the UARTAO. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -1011,6 +1018,7 @@ config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 + default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1106,6 +1114,7 @@ config DEBUG_UART_PHYS default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xd0012000 if DEBUG_MVEBU_UART + default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if ARCH_SPEAR13XX @@ -1125,7 +1134,7 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT @@ -1162,6 +1171,7 @@ config DEBUG_UART_VIRT default 0xfd012000 if ARCH_MV78XX0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X + default 0xf31004c0 if DEBUG_MESON_UARTAO default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1193,7 +1203,7 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT diff --git a/arch/arm/include/debug/meson.S b/arch/arm/include/debug/meson.S new file mode 100644 index 0000000..1bae99b --- /dev/null +++ b/arch/arm/include/debug/meson.S @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 Carlo Caione + * Carlo Caione <carlo@xxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define MESON_AO_UART_WFIFO 0x0 +#define MESON_AO_UART_STATUS 0xc + +#define MESON_AO_UART_TX_FIFO_EMPTY (1 << 22) +#define MESON_AO_UART_TX_FIFO_FULL (1 << 21) + + .macro addruart, rp, rv, tmp + ldr \rp, =(CONFIG_DEBUG_UART_PHYS) @ physical + ldr \rv, =(CONFIG_DEBUG_UART_VIRT) @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #MESON_AO_UART_WFIFO] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #MESON_AO_UART_STATUS] + tst \rd, #MESON_AO_UART_TX_FIFO_EMPTY + beq 1002b + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS] + tst \rd, #MESON_AO_UART_TX_FIFO_FULL + bne 1001b + .endm -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
