[PATCH 1/2] dt: bindings: add new DT entry for ath11k PCI device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ath11k driver supports PCI devices such as QCN9074/QCA6390.
Ath11k firmware uses host DDR memory, DT entry is used to reserve
these host DDR memory regions, send these memory base
addresses using DT entries.

Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
---
 .../bindings/net/wireless/qcom,ath11k.yaml         | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 5ac9616c9239..c7e6612e949c 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -19,6 +19,10 @@ description: |
   These devices use HOST DDR memory, HOST DDR memory can be reserved
   and send to ath11k driver from DT.
 
+  ATH11K supports PCI devices like QCA6390,QCN9074.
+  These devices use host DDR memory, host DDR memory can be reserved
+  and send to ath11k driver from DT.
+
 properties:
   compatible:
     enum:
@@ -177,6 +181,29 @@ properties:
     description:
       HOST DDR end address.
 
+  qcom,base-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Host DDR base address for firmware. QCN9074 firmware uses 45 MB of host
+      DDR memory in mode-0 and 15 MB of host DDR memory in mode-2.
+
+  qcom,caldb-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Host DDR address to store CALDB. CALDB is calibration data base
+      for WLAN channel and tx power.
+
+  qcom,start-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Host DDR start address. For example on x86 it is 0x0,
+      on IPQ8074 it is 0x41000000.
+
+  qcom,end-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Host DDR end address.
+
 required:
   - compatible
   - reg
@@ -317,3 +344,14 @@ examples:
         qcom,end-addr = <0x80000000>;
       };
     };
+
+  - |
+
+    pcie0_rp {
+      ath11k0 {
+        qcom,base-addr = <0x50F00000>;
+        qcom,caldb-addr = <0x53E00000>;
+        qcom,start-addr = <0x41000000>;
+        qcom,end-addr = <0x80000000>;
+      };
+    };
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux