Hi,
Thanks for your review.
On Sat, Aug 28, 2021 at 10:08:20PM -0700, Stephen Boyd wrote:
> Quoting Nobuhiro Iwamatsu (2021-08-04 02:22:43)
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> > index 5f06879d7fe9..dbf70fdecfc8 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -116,6 +116,7 @@ obj-y += ti/
> > obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
> > obj-$(CONFIG_ARCH_U8500) += ux500/
> > obj-y += versatile/
> > +obj-$(CONFIG_ARCH_VISCONTI) += visconti/
>
> Can we have an actual Kconfig symbol for this so we can compile test the
> driver?
I will add in next version.
>
> > ifeq ($(CONFIG_COMMON_CLK), y)
> > obj-$(CONFIG_X86) += x86/
> > endif
> > diff --git a/drivers/clk/visconti/Makefile b/drivers/clk/visconti/Makefile
> > new file mode 100644
> > index 000000000000..c1254fd52b31
> > --- /dev/null
> > +++ b/drivers/clk/visconti/Makefile
> > @@ -0,0 +1,5 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +# Makefile for Toshiba Visconti clock
> > +
> > +obj-y += clkc.o pll.o reset.o
> > +obj-y += pll-tmpv770x.o clkc-tmpv770x.o
> > diff --git a/drivers/clk/visconti/clkc-tmpv770x.c b/drivers/clk/visconti/clkc-tmpv770x.c
> > new file mode 100644
> > index 000000000000..6ee5c5179f7c
> > --- /dev/null
> > +++ b/drivers/clk/visconti/clkc-tmpv770x.c
> > @@ -0,0 +1,232 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Toshiba Visconti clock controller
> > + *
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +
> > +#include <dt-bindings/clock/toshiba,tmpv770x.h>
> > +#include <dt-bindings/reset/toshiba,tmpv770x.h>
>
> Please include these after linux headers.
I will move this.
>
> > +#include <linux/clk.h>
>
> Is it a clk provider or a clk consumer? Hopefully it's a clk provider,
> and thus this should be clk-provider.h instead of clk.h for the
> consumer.
I will change to use clk-provider.h.
>
> > +#include <linux/platform_device.h>
> > +
> > +#include "clkc.h"
> > +#include "reset.h"
> > +
> > +static DEFINE_SPINLOCK(tmpv770x_clk_lock);
> > +static DEFINE_SPINLOCK(tmpv770x_rst_lock);
> > +
> > +static const struct visconti_fixed_clk fixed_clk_tables[] = {
> > + /* PLL1 */
> > + /* PICMPT0/1, PITSC, PIUWDT, PISWDT, PISBUS, PIPMU, PIGPMU, PITMU */
> > + /* PIEMM, PIMISC, PIGCOMM, PIDCOMM, PIMBUS, PIGPIO, PIPGM */
> > + { TMPV770X_CLK_PIPLL1_DIV4, "pipll1_div4", "pipll1", 0, 1, 4, },
> > + /* PISBUS */
> > + { TMPV770X_CLK_PIPLL1_DIV2, "pipll1_div2", "pipll1", 0, 1, 2, },
> > + /* PICOBUS_CLK */
> > + { TMPV770X_CLK_PIPLL1_DIV1, "pipll1_div1", "pipll1", 0, 1, 1, },
> > + /* PIDNNPLL */
> > + /* CONN_CLK, PIMBUS, PICRC0/1 */
> > + { TMPV770X_CLK_PIDNNPLL_DIV1, "pidnnpll_div1", "pidnnpll", 0, 1, 1, },
> > + { TMPV770X_CLK_PIREFCLK, "pirefclk", "osc2-clk", 0, 1, 1, },
> > + { TMPV770X_CLK_WDTCLK, "wdtclk", "osc2-clk", 0, 1, 1, },
> > +};
> > +
> > +static const struct visconti_clk_gate_table pietherpll_clk_gate_tables[] = {
> > + /* pietherpll */
> > + { TMPV770X_CLK_PIETHER_2P5M, "piether_2p5m", "pietherpll",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 4, 200,
>
> There's quite a lot of CLK_IGNORE_UNUSED. Should these be
> CLK_IS_CRITICAL instead, and then only the ones that are truly critical
> to the system still running should be marked as critical along with a
> comment explaining what they're clocking and why that device isn't
> probing and enabling the clks itself.
I see. I will recheck and update this table.
>
> > + TMPV770X_RESET_PIETHER_2P5M, },
> > + { TMPV770X_CLK_PIETHER_25M, "piether_25m", "pietherpll",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 5, 20,
> > + TMPV770X_RESET_PIETHER_25M, },
> > + { TMPV770X_CLK_PIETHER_50M, "piether_50m", "pietherpll",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 6, 10,
> > + TMPV770X_RESET_PIETHER_50M, },
> > + { TMPV770X_CLK_PIETHER_125M, "piether_125m", "pietherpll",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 7, 4,
> > + TMPV770X_RESET_PIETHER_125M, },
> > +};
> > +
> > +static const struct visconti_clk_gate_table clk_gate_tables[] = {
> > + { TMPV770X_CLK_HOX, "hox", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x4C, 0x14C, 0, 1,
>
> Lowercase hex please.
I will fix in next version.
>
> > + TMPV770X_RESET_HOX, },
> > + { TMPV770X_CLK_PCIE_MSTR, "pcie_mstr", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 0, 1,
> > + TMPV770X_RESET_PCIE_MSTR, },
> > + { TMPV770X_CLK_PCIE_AUX, "pcie_aux", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x38, 0x138, 1, 24,
> > + TMPV770X_RESET_PCIE_AUX, },
> > + { TMPV770X_CLK_PIINTC, "piintc", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x8, 0x108, 0, 2,
> > + TMPV770X_RESET_PIINTC,},
> > + { TMPV770X_CLK_PIETHER_BUS, "piether_bus", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x34, 0x134, 0, 2,
> > + TMPV770X_RESET_PIETHER_BUS, }, /* BUS_CLK */
> > + { TMPV770X_CLK_PISPI0, "pispi0", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 0, 2,
> > + TMPV770X_RESET_PISPI0, },
> > + { TMPV770X_CLK_PISPI1, "pispi1", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 1, 2,
> > + TMPV770X_RESET_PISPI1, },
> > + { TMPV770X_CLK_PISPI2, "pispi2", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 2, 2,
> > + TMPV770X_RESET_PISPI2, },
> > + { TMPV770X_CLK_PISPI3, "pispi3", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 3, 2,
> > + TMPV770X_RESET_PISPI3,},
> > + { TMPV770X_CLK_PISPI4, "pispi4", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 4, 2,
> > + TMPV770X_RESET_PISPI4, },
> > + { TMPV770X_CLK_PISPI5, "pispi5", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 5, 2,
> > + TMPV770X_RESET_PISPI5},
> > + { TMPV770X_CLK_PISPI6, "pispi6", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x28, 0x128, 6, 2,
> > + TMPV770X_RESET_PISPI6,},
> > + { TMPV770X_CLK_PIUART0, "piuart0", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 0, 4,
> > + TMPV770X_RESET_PIUART0,},
> > + { TMPV770X_CLK_PIUART1, "piuart1", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 1, 4,
> > + TMPV770X_RESET_PIUART1, },
> > + { TMPV770X_CLK_PIUART2, "piuart2", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 2, 4,
> > + TMPV770X_RESET_PIUART2, },
> > + { TMPV770X_CLK_PIUART3, "piuart3", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x2C, 0x12C, 3, 4,
> > + TMPV770X_RESET_PIUART3, },
> > + { TMPV770X_CLK_PII2C0, "pii2c0", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 0, 4,
> > + TMPV770X_RESET_PII2C0, },
> > + { TMPV770X_CLK_PII2C1, "pii2c1", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 1, 4,
> > + TMPV770X_RESET_PII2C1, },
> > + { TMPV770X_CLK_PII2C2, "pii2c2", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 2, 4,
> > + TMPV770X_RESET_PII2C2, },
> > + { TMPV770X_CLK_PII2C3, "pii2c3", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 3, 4,
> > + TMPV770X_RESET_PII2C3,},
> > + { TMPV770X_CLK_PII2C4, "pii2c4", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 4, 4,
> > + TMPV770X_RESET_PII2C4, },
> > + { TMPV770X_CLK_PII2C5, "pii2c5", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 5, 4,
> > + TMPV770X_RESET_PII2C5, },
> > + { TMPV770X_CLK_PII2C6, "pii2c6", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 6, 4,
> > + TMPV770X_RESET_PII2C6, },
> > + { TMPV770X_CLK_PII2C7, "pii2c7", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 7, 4,
> > + TMPV770X_RESET_PII2C7, },
> > + { TMPV770X_CLK_PII2C8, "pii2c8", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x30, 0x130, 8, 4,
> > + TMPV770X_RESET_PII2C8, },
> > + /* PIPCMIF */
> > + { TMPV770X_CLK_PIPCMIF, "pipcmif", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x64, 0x164, 0, 4,
> > + TMPV770X_RESET_PIPCMIF, },
> > + /* PISYSTEM */
> > + { TMPV770X_CLK_WRCK, "wrck", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x68, 0x168, 9, 32,
> > + -1, }, /* No reset */
> > + { TMPV770X_CLK_PICKMON, "pickmon", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x10, 0x110, 8, 4,
> > + TMPV770X_RESET_PICKMON, },
> > + { TMPV770X_CLK_SBUSCLK, "sbusclk", "pipll1",
> > + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0x14, 0x114, 0, 4,
> > + TMPV770X_RESET_SBUSCLK, },
> > +};
> > +
> > +static const struct visconti_reset_data clk_reset_data[] = {
> > + [TMPV770X_RESET_PIETHER_2P5M] = { 0x434, 0x534, 4, },
> > + [TMPV770X_RESET_PIETHER_25M] = { 0x434, 0x534, 5, },
> > + [TMPV770X_RESET_PIETHER_50M] = { 0x434, 0x534, 6, },
> > + [TMPV770X_RESET_PIETHER_125M] = { 0x434, 0x534, 7, },
> > + [TMPV770X_RESET_HOX] = { 0x44C, 0x54C, 0, },
> > + [TMPV770X_RESET_PCIE_MSTR] = { 0x438, 0x538, 0, },
> > + [TMPV770X_RESET_PCIE_AUX] = { 0x438, 0x538, 1, },
> > + [TMPV770X_RESET_PIINTC] = { 0x408, 0x508, 0, },
> > + [TMPV770X_RESET_PIETHER_BUS] = { 0x434, 0x534, 0, },
> > + [TMPV770X_RESET_PISPI0] = { 0x428, 0x528, 0, },
> > + [TMPV770X_RESET_PISPI1] = { 0x428, 0x528, 1, },
> > + [TMPV770X_RESET_PISPI2] = { 0x428, 0x528, 2, },
> > + [TMPV770X_RESET_PISPI3] = { 0x428, 0x528, 3, },
> > + [TMPV770X_RESET_PISPI4] = { 0x428, 0x528, 4, },
> > + [TMPV770X_RESET_PISPI5] = { 0x428, 0x528, 5, },
> > + [TMPV770X_RESET_PISPI6] = { 0x428, 0x528, 6, },
> > + [TMPV770X_RESET_PIUART0] = { 0x42C, 0x52C, 0, },
> > + [TMPV770X_RESET_PIUART1] = { 0x42C, 0x52C, 1, },
> > + [TMPV770X_RESET_PIUART2] = { 0x42C, 0x52C, 2, },
> > + [TMPV770X_RESET_PIUART3] = { 0x42C, 0x52C, 3, },
> > + [TMPV770X_RESET_PII2C0] = { 0x430, 0x530, 0, },
> > + [TMPV770X_RESET_PII2C1] = { 0x430, 0x530, 1, },
> > + [TMPV770X_RESET_PII2C2] = { 0x430, 0x530, 2, },
> > + [TMPV770X_RESET_PII2C3] = { 0x430, 0x530, 3, },
> > + [TMPV770X_RESET_PII2C4] = { 0x430, 0x530, 4, },
> > + [TMPV770X_RESET_PII2C5] = { 0x430, 0x530, 5, },
> > + [TMPV770X_RESET_PII2C6] = { 0x430, 0x530, 6, },
> > + [TMPV770X_RESET_PII2C7] = { 0x430, 0x530, 7, },
> > + [TMPV770X_RESET_PII2C8] = { 0x430, 0x530, 8, },
> > + [TMPV770X_RESET_PIPCMIF] = { 0x464, 0x564, 0, },
> > + [TMPV770X_RESET_PICKMON] = { 0x410, 0x510, 8, },
> > + [TMPV770X_RESET_SBUSCLK] = { 0x414, 0x514, 0, },
> > +};
> > +
> > +static void __init tmpv770x_clkc_setup_clks(struct device_node *np)
> > +{
> > + struct visconti_clk_provider *ctx;
> > + struct regmap *regmap;
> > + int ret, i;
> > +
> > + regmap = device_node_to_regmap(np);
>
> Is it inside a syscon?
Yes, this IP works as syscon. I will fix to use syscon.
>
> > + if (IS_ERR(regmap))
> > + return;
> > +
> > + ctx = visconti_init_clk(np, regmap, TMPV770X_NR_CLK);
> > + if (IS_ERR(ctx))
> > + return;
> > +
> > + ret = visconti_register_reset_controller(np, regmap, clk_reset_data,
> > + TMPV770X_NR_RESET,
> > + &visconti_reset_ops,
> > + &tmpv770x_rst_lock);
> > + if (ret) {
> > + pr_err("Failed to register reset controller: %d\n", ret);
> > + return;
> > + }
> > +
> > + for (i = 0; i < (ARRAY_SIZE(fixed_clk_tables)); i++)
> > + ctx->clk_data.clks[fixed_clk_tables[i].id] =
> > + clk_register_fixed_factor(NULL,
> > + fixed_clk_tables[i].name,
> > + fixed_clk_tables[i].parent,
> > + fixed_clk_tables[i].flag,
> > + fixed_clk_tables[i].mult,
> > + fixed_clk_tables[i].div);
> > +
> > + ret = visconti_clk_register_gates(ctx, clk_gate_tables,
> > + ARRAY_SIZE(clk_gate_tables), clk_reset_data,
> > + &tmpv770x_clk_lock);
> > + if (ret) {
> > + pr_err("Failed to register main clock gate: %d\n", ret);
> > + return;
> > + }
> > +
> > + ret = visconti_clk_register_gates(ctx, pietherpll_clk_gate_tables,
> > + ARRAY_SIZE(pietherpll_clk_gate_tables),
> > + clk_reset_data, &tmpv770x_clk_lock);
> > + if (ret) {
> > + pr_err("Failed to register pietherpll clock gate: %d\n", ret);
> > + return;
> > + }
> > +
> > + of_clk_add_provider(np, of_clk_src_onecell_get, &ctx->clk_data);
> > +}
> > +
> > +CLK_OF_DECLARE_DRIVER(tmpv770x_clkc, "toshiba,tmpv7708-pismu", tmpv770x_clkc_setup_clks);
>
> Any chance this can be a platform driver?
>
OK , I will update to platform driver.
> > diff --git a/drivers/clk/visconti/clkc.c b/drivers/clk/visconti/clkc.c
> > new file mode 100644
> > index 000000000000..32b6f6266154
> > --- /dev/null
> > +++ b/drivers/clk/visconti/clkc.c
> > @@ -0,0 +1,220 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Toshiba Visconti clock controller
> > + *
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +#include <linux/string.h>
> > +
> > +#include "clkc.h"
> > +
> > +static inline struct visconti_clk_gate *to_visconti_clk_gate(struct clk_hw *hw)
> > +{
> > + return container_of(hw, struct visconti_clk_gate, hw);
> > +}
> > +
> > +static int visconti_gate_clk_is_enabled(struct clk_hw *hw)
> > +{
> > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw);
> > + u32 clk = BIT(gate->ck_idx);
> > + u32 val;
> > +
> > + regmap_read(gate->regmap, gate->ckon_offset, &val);
> > + return (val & clk) ? 1 : 0;
> > +}
> > +
> > +static void visconti_gate_clk_disable(struct clk_hw *hw)
> > +{
> > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw);
> > + u32 clk = BIT(gate->ck_idx);
> > + u32 rst = BIT(gate->rs_idx);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(gate->lock, flags);
> > +
> > + if (visconti_gate_clk_is_enabled(hw)) {
>
> So we never disable the clk?
Thanks. I will fix.
>
> > + spin_unlock_irqrestore(gate->lock, flags);
> > + return;
> > + }
> > +
> > + /* Reset release */
> > + regmap_update_bits(gate->regmap, gate->rson_offset, rst, 1);
> > +
> > + udelay(100);
> > +
> > + /* Disable clock */
> > + regmap_update_bits(gate->regmap, gate->ckoff_offset, clk, 1);
> > + spin_unlock_irqrestore(gate->lock, flags);
> > +}
> > +
> > +static int visconti_gate_clk_enable(struct clk_hw *hw)
> > +{
> > + struct visconti_clk_gate *gate = to_visconti_clk_gate(hw);
> > + u32 clk = BIT(gate->ck_idx);
> > + u32 rst = BIT(gate->rs_idx);
> > + unsigned long flags;
> > + u32 val;
> > +
> > + spin_lock_irqsave(gate->lock, flags);
> > +
> > + if (visconti_gate_clk_is_enabled(hw)) {
>
> The core framework should only call down to here if the clk is actually
> disabled. This check can be removed.
>
OK, I will remove this check.
> > + spin_unlock_irqrestore(gate->lock, flags);
> > + return 0;
> > + }
> > +
> > + regmap_update_bits(gate->regmap, gate->ckon_offset, clk, 1);
> > + /* Need read back */
>
> Why? Please indicate why instead of just saying what the code is doing.
>
This was an unnecessary operation. I will delete.
> > + regmap_read(gate->regmap, gate->ckon_offset, &val);
> > +
> > + udelay(100);
> > + /* Reset release */
> > + regmap_update_bits(gate->regmap, gate->rsoff_offset, rst, 1);
> > + /* Need read back */
> > + regmap_read(gate->regmap, gate->ckoff_offset, &val);
> > + spin_unlock_irqrestore(gate->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct clk_ops visconti_clk_gate_ops = {
> > + .enable = visconti_gate_clk_enable,
> > + .disable = visconti_gate_clk_disable,
> > + .is_enabled = visconti_gate_clk_is_enabled,
> > +};
> > +
> > +static struct clk_hw *visconti_clk_register_gate(struct device *dev,
> > + const char *name,
> > + const char *parent_name,
> > + struct regmap *regmap,
> > + const struct visconti_clk_gate_table *clks,
> > + u32 rson_offset,
> > + u32 rsoff_offset,
> > + u8 rs_idx,
> > + spinlock_t *lock)
> > +{
> > + struct visconti_clk_gate *gate;
> > + struct clk_init_data init;
> > + struct clk_hw *hw;
> > + int ret;
> > +
> > + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> > + if (!gate)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + init.name = name;
> > + init.ops = &visconti_clk_gate_ops;
> > + init.flags = clks->flags;
> > + init.parent_names = parent_name ? &parent_name : NULL;
> > + init.num_parents = parent_name ? 1 : 0;
>
> Do some clks have parents and other clks don't? Or do they always have
> parents? Preferably it's one or the other. And if there are parents,
> please use clk_parent_data instead of parent_names.
>
OK, I will update to use clk_parent_data.
> > +
> > + gate->regmap = regmap;
> > + gate->ckon_offset = clks->ckon_offset;
> > + gate->ckoff_offset = clks->ckoff_offset;
> > + gate->ck_idx = clks->ck_idx;
> > + gate->rson_offset = rson_offset;
> > + gate->rsoff_offset = rsoff_offset;
> > + gate->rs_idx = rs_idx;
> > + gate->lock = lock;
> > + gate->hw.init = &init;
> > +
> > + hw = &gate->hw;
> > + ret = clk_hw_register(dev, hw);
>
> Is the dev non-NULL? If yes then can devm be used?
>
I will update to use devm.
> > + if (ret) {
> > + kfree(gate);
> > + hw = ERR_PTR(ret);
> > + }
> > +
> > + return hw;
> > +}
> > +
> > +int visconti_clk_register_gates(struct visconti_clk_provider *data,
> > + const struct visconti_clk_gate_table *clks,
> > + int num_gate, const struct visconti_reset_data *reset,
> > + spinlock_t *lock)
> > +{
> > + u32 rson_offset, rsoff_offset;
> > + struct clk_hw *hw_clk;
> > + u8 rs_idx;
> > + int i;
> > +
> > + for (i = 0; i < num_gate; i++) {
> > + struct clk *clk;
> > + char *div_name;
> > +
> > + div_name = kasprintf(GFP_KERNEL, "%s_div", clks[i].name);
> > + if (!div_name)
> > + return -ENOMEM;
> > +
> > + if (clks[i].rs_id >= 0) {
> > + rson_offset = reset[clks[i].rs_id].rson_offset;
> > + rsoff_offset = reset[clks[i].rs_id].rsoff_offset;
> > + rs_idx = reset[clks[i].rs_id].rs_idx;
> > + } else {
> > + rson_offset = rsoff_offset = rs_idx = -1;
> > + }
> > +
> > + clk = clk_register_fixed_factor(NULL, div_name, clks[i].parent,
> > + 0, 1, clks[i].div);
> > + if (IS_ERR(clk))
> > + return PTR_ERR(clk);
> > +
> > + hw_clk = visconti_clk_register_gate(NULL,
>
> Oh it's always NULL? Sad
I will update this fuction, and avoid using NULL.
>
> > + clks[i].name,
> > + div_name,
> > + data->regmap,
> > + &clks[i],
> > + rson_offset,
> > + rsoff_offset,
> > + rs_idx,
> > + lock);
> > + kfree(div_name);
> > + if (IS_ERR(hw_clk)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, clks[i].name);
> > + return PTR_ERR(hw_clk);
> > + }
> > +
> > + data->clk_data.clks[clks[i].id] = hw_clk->clk;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np,
> > + struct regmap *regmap,
> > + unsigned long nr_clks)
> > +{
> > + struct visconti_clk_provider *ctx;
> > + struct clk **clk_table;
> > + int i;
> > +
> > + ctx = kzalloc(sizeof(struct visconti_clk_provider), GFP_KERNEL);
>
> sizeof(*ctx)?
I will fix.
>
> > + if (!ctx)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
>
> sizeof(*clk_table)?
>
I will fix.
> > + if (!clk_table)
> > + goto err;
> > +
> > + for (i = 0; i < nr_clks; ++i)
> > + clk_table[i] = ERR_PTR(-ENOENT);
> > + ctx->node = np;
> > + ctx->regmap = regmap;
> > + ctx->clk_data.clks = clk_table;
> > + ctx->clk_data.clk_num = nr_clks;
> > +
> > + return ctx;
> > +err:
> > + kfree(ctx);
> > + return ERR_PTR(-ENOMEM);
> > +}
> > diff --git a/drivers/clk/visconti/clkc.h b/drivers/clk/visconti/clkc.h
> > new file mode 100644
> > index 000000000000..4df8788d635a
> > --- /dev/null
> > +++ b/drivers/clk/visconti/clkc.h
> > @@ -0,0 +1,75 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Toshiba Visconti clock controller
> > + *
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +
> > +#ifndef _VISCONTI_CLKC_H_
> > +#define _VISCONTI_CLKC_H_
> > +
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/delay.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +#include <linux/string.h>
> > +#include <linux/io.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include "reset.h"
> > +
> > +struct visconti_clk_provider {
> > + struct device_node *node;
> > + struct regmap *regmap;
> > + struct clk_onecell_data clk_data;
> > +};
> > +
> > +struct visconti_clk_gate_table {
> > + unsigned int id;
> > + const char *name;
> > + const char *parent;
> > + u8 flags;
> > + u32 ckon_offset;
> > + u32 ckoff_offset;
> > + u8 ck_idx;
> > + unsigned int div;
> > + u8 rs_id;
> > +};
> > +
> > +struct visconti_fixed_clk {
> > + unsigned int id;
> > + const char *name;
> > + const char *parent;
> > + unsigned long flag;
> > + unsigned int mult;
> > + unsigned int div;
> > +};
> > +
> > +struct visconti_clk_gate {
> > + struct clk_hw hw;
> > + struct regmap *regmap;
> > + u32 ckon_offset;
> > + u32 ckoff_offset;
> > + u8 ck_idx;
> > + u8 flags;
> > + u32 rson_offset;
> > + u32 rsoff_offset;
> > + u8 rs_idx;
> > + spinlock_t *lock;
> > +};
> > +
> > +struct visconti_clk_provider *visconti_init_clk(struct device_node *np,
> > + struct regmap *regmap,
> > + unsigned long nr_clks);
> > +int visconti_clk_register_gates(struct visconti_clk_provider *data,
> > + const struct visconti_clk_gate_table *clks,
> > + int num_gate,
> > + const struct visconti_reset_data *reset,
> > + spinlock_t *lock);
> > +#endif /* _VISCONTI_CLKC_H_ */
> > diff --git a/drivers/clk/visconti/pll-tmpv770x.c b/drivers/clk/visconti/pll-tmpv770x.c
> > new file mode 100644
> > index 000000000000..a0874cb6a67b
> > --- /dev/null
> > +++ b/drivers/clk/visconti/pll-tmpv770x.c
> > @@ -0,0 +1,85 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Toshiba Visconti PLL controller
> > + *
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +
> > +#include <dt-bindings/clock/toshiba,tmpv770x.h>
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +
> > +#include "pll.h"
> > +
> > +static DEFINE_SPINLOCK(tmpv770x_pll_lock);
> > +
> > +static const struct visconti_pll_rate_table pipll0_rates[] __initconst = {
> > + VISCONTI_PLL_RATE(840000000, 0x1, 0x0, 0x1, 0x54, 0x000000, 0x2, 0x1),
> > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1),
> > + VISCONTI_PLL_RATE(600000000, 0x1, 0x0, 0x1, 0x3C, 0x000000, 0x2, 0x1),
> > + { /* sentinel */ },
> > +};
> > +
> > +static const struct visconti_pll_rate_table piddrcpll_rates[] __initconst = {
> > + VISCONTI_PLL_RATE(780000000, 0x1, 0x0, 0x1, 0x4E, 0x000000, 0x2, 0x1),
> > + VISCONTI_PLL_RATE(760000000, 0x1, 0x0, 0x1, 0x4C, 0x000000, 0x2, 0x1),
> > + { /* sentinel */ },
> > +};
> > +
> > +static const struct visconti_pll_rate_table pivoifpll_rates[] __initconst = {
> > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2),
> > + VISCONTI_PLL_RATE(148500000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x2),
> > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2),
> > + VISCONTI_PLL_RATE(74250000, 0x1, 0x1, 0x1, 0x3B, 0x666666, 0x4, 0x4),
> > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4),
> > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4),
> > + VISCONTI_PLL_RATE(35750000, 0x1, 0x1, 0x1, 0x32, 0x0CCCCC, 0x7, 0x4),
> > + { /* sentinel */ },
> > +};
> > +
> > +static const struct visconti_pll_rate_table piimgerpll_rates[] __initconst = {
> > + VISCONTI_PLL_RATE(165000000, 0x1, 0x0, 0x1, 0x42, 0x000000, 0x4, 0x2),
> > + VISCONTI_PLL_RATE(96000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x2),
> > + VISCONTI_PLL_RATE(54000000, 0x1, 0x0, 0x1, 0x36, 0x000000, 0x5, 0x4),
> > + VISCONTI_PLL_RATE(48000000, 0x1, 0x0, 0x1, 0x30, 0x000000, 0x5, 0x4),
> > + { /* sentinel */ },
> > +};
> > +
> > +static const struct visconti_pll_info pll_info[] __initconst = {
> > + { TMPV770X_PLL_PIPLL0, "pipll0", "osc2-clk", 0, 0x0, pipll0_rates },
> > + { TMPV770X_PLL_PIDDRCPLL, "piddrcpll", "osc2-clk", 0, 0x500, piddrcpll_rates },
> > + { TMPV770X_PLL_PIVOIFPLL, "pivoifpll", "osc2-clk", 0, 0x600, pivoifpll_rates },
> > + { TMPV770X_PLL_PIIMGERPLL, "piimgerpll", "osc2-clk", 0, 0x700, piimgerpll_rates },
> > +};
> > +
> > +static void __init tmpv770x_setup_plls(struct device_node *np)
> > +{
> > + struct visconti_pll_provider *ctx;
> > + void __iomem *reg_base;
> > +
> > + reg_base = of_iomap(np, 0);
> > + if (!reg_base)
> > + return;
> > +
> > + ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
> > + if (IS_ERR(ctx)) {
> > + iounmap(reg_base);
> > + return;
> > + }
> > +
> > + ctx->clk_data.clks[TMPV770X_PLL_PIPLL1] =
> > + clk_register_fixed_rate(NULL, "pipll1", NULL, 0, 600000000);
> > + ctx->clk_data.clks[TMPV770X_PLL_PIDNNPLL] =
> > + clk_register_fixed_rate(NULL, "pidnnpll", NULL, 0, 500000000);
> > + ctx->clk_data.clks[TMPV770X_PLL_PIETHERPLL] =
> > + clk_register_fixed_rate(NULL, "pietherpll", NULL, 0, 500000000);
> > +
> > + visconti_register_plls(ctx, pll_info, ARRAY_SIZE(pll_info), &tmpv770x_pll_lock);
> > +}
> > +
> > +CLK_OF_DECLARE_DRIVER(tmpv770x_plls, "toshiba,tmpv7708-pipllct", tmpv770x_setup_plls);
>
> DECLARE_DRIVER is for when more than one device needs to probe the node
> in DT. Is that happening here? If so, please add a comment indicating
> what the other driver is.
I see. This driver does not need to use DECLARE_DRIVER. I had the wrong understanding. I will switch to the platform driver.
>
> > diff --git a/drivers/clk/visconti/pll.c b/drivers/clk/visconti/pll.c
> > new file mode 100644
> > index 000000000000..7baa9512fad9
> > --- /dev/null
> > +++ b/drivers/clk/visconti/pll.c
> > @@ -0,0 +1,369 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Toshiba Visconti PLL driver
> > + *
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/slab.h>
> > +#include <linux/io.h>
> > +
> > +#include "pll.h"
> > +
> > +struct visconti_pll {
> > + struct clk_hw hw;
> > + void __iomem *pll_base;
> > + spinlock_t *lock;
> > + int rate_count;
>
> size_t? And then place next to rate_table so we know they're related
> please.
OK, I will fix to use size_t, and move.
>
> > + unsigned long flags;
> > + const struct visconti_pll_rate_table *rate_table;
> > + struct visconti_pll_provider *ctx;
> > +};
> > +
> > +#define PLL_CONF_REG 0x0000
> > +#define PLL_CTRL_REG 0x0004
> > +#define PLL_FRACMODE_REG 0x0010
> > +#define PLL_INTIN_REG 0x0014
> > +#define PLL_FRACIN_REG 0x0018
> > +#define PLL_REFDIV_REG 0x001C
> > +#define PLL_POSTDIV_REG 0x0020
> > +
> > +#define PLL_CONFIG_SEL BIT(0)
> > +#define PLL_PLLEN BIT(4)
> > +#define PLL_BYPASS BIT(16)
> > +#define PLL_INTIN_MASK GENMASK(11, 0)
> > +#define PLL_FRACIN_MASK GENMASK(23, 0)
> > +#define PLL_REFDIV_MASK GENMASK(5, 0)
> > +#define PLL_POSTDIV_MASK GENMASK(2, 0)
> > +
> > +static inline struct visconti_pll *to_visconti_pll(struct clk_hw *hw)
> > +{
> > + return container_of(hw, struct visconti_pll, hw);
> > +}
> > +
> > +static void visconti_pll_get_params(struct visconti_pll *pll,
> > + struct visconti_pll_rate_table *rate_table)
> > +{
> > + u32 postdiv, val;
> > +
> > + val = readl(pll->pll_base + PLL_FRACMODE_REG);
> > + rate_table->dacen = (val >> 4) & 0x1;
>
> What is 0x1? Some bitfield? Can it be a #define at least? Same for 4.
> Better yet, use GENMASK and FIELD_PREP() and FIELD_GET() macros.
I will fix to use macros.
>
> > + rate_table->dsmen = val & 0x1;
> > + rate_table->fracin = readl(pll->pll_base + PLL_FRACIN_REG) & PLL_FRACIN_MASK;
> > + rate_table->intin = readl(pll->pll_base + PLL_INTIN_REG) & PLL_INTIN_MASK;
> > + rate_table->refdiv = readl(pll->pll_base + PLL_REFDIV_REG) & PLL_REFDIV_MASK;
> > +
> > + postdiv = readl(pll->pll_base + PLL_POSTDIV_REG);
> > + rate_table->postdiv1 = postdiv & PLL_POSTDIV_MASK;
> > + rate_table->postdiv2 = (postdiv >> 4) & PLL_POSTDIV_MASK;
> > +}
> > +
> > +static const struct visconti_pll_rate_table *visconti_get_pll_settings(struct visconti_pll *pll,
> > + unsigned long rate)
> > +{
> > + const struct visconti_pll_rate_table *rate_table = pll->rate_table;
> > + int i;
> > +
> > + for (i = 0; i < pll->rate_count; i++) {
> > + if (rate == rate_table[i].rate)
> > + return &rate_table[i];
> > + }
>
> Drop braces please.
>
I will drop.
> > +
> > + return NULL;
> > +}
> > +
> > +static unsigned long visconti_get_pll_rate_from_data(struct visconti_pll *pll,
> > + struct visconti_pll_rate_table *rate)
>
> const pointers?
I will fix to use const pointer.
>
> > +{
> > + const struct visconti_pll_rate_table *rate_table = pll->rate_table;
> > + int i;
> > +
> > + for (i = 0; i < pll->rate_count; i++) {
> > + if (rate_table[i].dacen == rate->dacen &&
> > + rate_table[i].dsmen == rate->dsmen &&
> > + rate_table[i].fracin == rate->fracin &&
> > + rate_table[i].intin == rate->intin &&
> > + rate_table[i].refdiv == rate->refdiv &&
> > + rate_table[i].postdiv1 == rate->postdiv1 &&
> > + rate_table[i].postdiv2 == rate->postdiv2)
>
> Is it not the same table? Can we just compare the two pointers instead
> of each member?
OK, I will update to use memcmp or others.
>
> > + return rate_table[i].rate;
> > + }
> > +
> > + /* set default */
> > + return rate_table[0].rate;
> > +}
> > +
> > +static long visconti_pll_round_rate(struct clk_hw *hw,
> > + unsigned long rate, unsigned long *prate)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + const struct visconti_pll_rate_table *rate_table = pll->rate_table;
> > + int i;
> > +
> > + /* Assumming rate_table is in descending order */
> > + for (i = 0; i < pll->rate_count; i++) {
> > + if (rate >= rate_table[i].rate)
> > + return rate_table[i].rate;
> > + }
>
> Drop braces please.
I will drop.
>
> > +
> > + /* return minimum supported value */
> > + return rate_table[i - 1].rate;
> > +}
> > +
> > +static unsigned long visconti_pll_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + struct visconti_pll_rate_table rate_table;
> > +
> > + memset(&rate_table, 0, sizeof(rate_table));
> > + visconti_pll_get_params(pll, &rate_table);
> > +
> > + return visconti_get_pll_rate_from_data(pll, &rate_table);
>
> Oh. Can we do math instead?
>
> > +}
> > +
> > +static int visconti_pll_set_params(struct visconti_pll *pll,
> > + const struct visconti_pll_rate_table *rate_table)
> > +{
> > + /* update pll values */
>
> This comment is worthless. Please remove.
I will drop.
>
> > + writel(((rate_table->dacen << 4) | rate_table->dsmen),
>
> One too many parenthesis here. Please clean it up.
>
> > + pll->pll_base + PLL_FRACMODE_REG);
> > + writel(((rate_table->postdiv2 << 4) | rate_table->postdiv1),
>
> Same.
>
OK, I will fix to use macros.
> > + pll->pll_base + PLL_POSTDIV_REG);
> > + writel(rate_table->intin, pll->pll_base + PLL_INTIN_REG);
> > + writel(rate_table->fracin, pll->pll_base + PLL_FRACIN_REG);
> > + writel(rate_table->refdiv, pll->pll_base + PLL_REFDIV_REG);
> > +
> > + return 0;
> > +}
> > +
> > +static int visconti_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + const struct visconti_pll_rate_table *rate_table;
> > +
> > + /* Get required rate settings from table */
>
> This comment is worthless, please remove.
>
I will drop.
> > + rate_table = visconti_get_pll_settings(pll, rate);
> > + if (!rate_table) {
> > + pr_err("Invalid rate : %lu for pll clk %s\n",
>
> Please don't print anything during set_rate. It can be quite noisy if
> something like a cpufreq driver keeps calling this with the incorrect
> frequency.
OK, I will drop this.
>
> > + parent_rate, __clk_get_name(hw->clk));
> > + return -EINVAL;
> > + }
> > +
> > + return visconti_pll_set_params(pll, rate_table);
> > +}
> > +
> > +static int visconti_pll_is_enabled(struct clk_hw *hw)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + spin_lock_irqsave(pll->lock, flags);
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + spin_unlock_irqrestore(pll->lock, flags);
>
> Don't think we need a spinlock to read a register. After this unlocks it
> can be disabled anyway, so what's the point to locking here?
>
Indeed. I will drop lock and unlock.
> > +
> > + return (reg & PLL_PLLEN);
> > +}
> > +
> > +static int visconti_pll_enable(struct clk_hw *hw)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + const struct visconti_pll_rate_table *rate_table = pll->rate_table;
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + if (visconti_pll_is_enabled(hw))
> > + return 0;
>
> Drop.
I will drop.
>
> > +
> > + spin_lock_irqsave(pll->lock, flags);
> > +
> > + /* Change to access via register */
> > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG);
> > +
> > + /* Change to BYPASS mode */
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg |= PLL_BYPASS;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + /* Set DIV register .....*/
> > + visconti_pll_set_params(pll, &rate_table[0]);
> > +
> > + /* Disable PLL register */
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg &= ~PLL_PLLEN;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + /* Wait 1us */
> > + udelay(1);
> > +
> > + /* Enable PLL register */
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg |= PLL_PLLEN;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + /* Wait 40us */
> > + udelay(40);
> > +
> > + /* Change to PLL mode */
>
> Every comment in here is saying what the code is doing. Please remove
> them.
OK, I will drop.
>
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg &= ~PLL_BYPASS;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + spin_unlock_irqrestore(pll->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static void visconti_pll_disable(struct clk_hw *hw)
> > +{
> > + struct visconti_pll *pll = to_visconti_pll(hw);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + if (!visconti_pll_is_enabled(hw))
> > + return;
> > +
> > + spin_lock_irqsave(pll->lock, flags);
> > +
> > + /* Change to access via register */
>
> This comment is almost useful, except I don't know why we need to change
> access, which is the important part.
>
The content of this comment was unclear.
This operation unlocks the parameter setting via the register.
I will update.
> > + writel(PLL_CONFIG_SEL, pll->pll_base + PLL_CONF_REG);
> > +
> > + /* Change to BYPASS mode */
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg |= PLL_BYPASS;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + /* PLL disable */
> > + reg = readl(pll->pll_base + PLL_CTRL_REG);
> > + reg &= ~PLL_PLLEN;
> > + writel(reg, pll->pll_base + PLL_CTRL_REG);
> > +
> > + spin_unlock_irqrestore(pll->lock, flags);
> > +}
> > +
> > +static const struct clk_ops visconti_pll_ops = {
> > + .enable = visconti_pll_enable,
> > + .disable = visconti_pll_disable,
> > + .is_enabled = visconti_pll_is_enabled,
> > + .round_rate = visconti_pll_round_rate,
> > + .recalc_rate = visconti_pll_recalc_rate,
> > + .set_rate = visconti_pll_set_rate,
> > +};
> > +
> > +static struct clk *visconti_register_pll(struct visconti_pll_provider *ctx,
> > + const char *name,
> > + const char *parent_name,
> > + int offset,
> > + const struct visconti_pll_rate_table *rate_table,
> > + u8 clk_pll_flags,
>
> Are the flags used?
>
Not use. I will drop.
> > + spinlock_t *lock)
> > +{
> > + struct clk_init_data init;
> > + struct visconti_pll *pll;
> > + struct clk *pll_clk;
> > + int len;
> > +
> > + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> > + if (!pll)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Create the actual pll */
>
> Worthless comment.
>
I will drop.
> > + init.name = name;
> > + init.flags = CLK_IGNORE_UNUSED;
> > + init.parent_names = &parent_name;
> > + init.num_parents = 1;
> > +
> > + for (len = 0; rate_table[len].rate != 0; )
> > + len++;
> > + pll->rate_count = len;
> > + pll->rate_table = kmemdup(rate_table,
> > + pll->rate_count * sizeof(struct visconti_pll_rate_table),
> > + GFP_KERNEL);
>
> Do we need to duplicate the table? Can't that be const?
>
I see. I will fix this.
> > + WARN(!pll->rate_table, "%s: could not allocate rate table for %s\n", __func__, name);
> > +
> > + init.ops = &visconti_pll_ops;
> > + pll->hw.init = &init;
> > + pll->pll_base = ctx->reg_base + offset;
> > + pll->flags = clk_pll_flags;
> > + pll->lock = lock;
> > + pll->ctx = ctx;
> > +
> > + pll_clk = clk_register(NULL, &pll->hw);
>
> Please use clk_hw_register().
OK, I will update to use clk_hw_register.
>
> > + if (IS_ERR(pll_clk)) {
> > + pr_err("failed to register pll clock %s : %ld\n", name, PTR_ERR(pll_clk));
> > + kfree(pll);
> > + }
> > +
> > + return pll_clk;
> > +}
> > +
> > +static void visconti_pll_add_lookup(struct visconti_pll_provider *ctx, struct clk *clk,
> > + unsigned int id)
> > +{
> > + if (ctx->clk_data.clks && id)
> > + ctx->clk_data.clks[id] = clk;
> > +}
> > +
> > +void __init visconti_register_plls(struct visconti_pll_provider *ctx,
> > + const struct visconti_pll_info *list,
> > + unsigned int nr_plls,
> > + spinlock_t *lock)
> > +{
> > + int idx;
> > +
> > + for (idx = 0; idx < nr_plls; idx++, list++) {
> > + struct clk *clk;
> > +
> > + clk = visconti_register_pll(ctx,
> > + list->name,
> > + list->parent,
> > + list->base_reg,
> > + list->rate_table,
> > + list->flags,
> > + lock);
> > + if (IS_ERR(clk)) {
> > + pr_err("failed to register clock %s\n", list->name);
> > + continue;
> > + }
> > +
> > + visconti_pll_add_lookup(ctx, clk, list->id);
> > + }
> > +}
> > +
> > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
> > + void __iomem *base,
> > + unsigned long nr_plls)
> > +{
> > + struct visconti_pll_provider *ctx;
> > + struct clk **clk_table;
> > + int i;
> > +
> > + ctx = kzalloc(sizeof(struct visconti_pll_provider), GFP_KERNEL);
> > + if (!ctx)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + clk_table = kcalloc(nr_plls, sizeof(struct clk *), GFP_KERNEL);
> > + if (!clk_table)
> > + goto err;
> > +
> > + for (i = 0; i < nr_plls; ++i)
> > + clk_table[i] = ERR_PTR(-ENOENT);
> > +
> > + ctx->node = np;
> > + ctx->reg_base = base;
> > + ctx->clk_data.clks = clk_table;
> > + ctx->clk_data.clk_num = nr_plls;
> > +
> > + return ctx;
> > +
> > +err:
> > + kfree(ctx);
> > + return ERR_PTR(-ENOMEM);
> > +}
> > diff --git a/drivers/clk/visconti/pll.h b/drivers/clk/visconti/pll.h
> > new file mode 100644
> > index 000000000000..ce0ce1d8cd88
> > --- /dev/null
> > +++ b/drivers/clk/visconti/pll.h
> > @@ -0,0 +1,63 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2021 TOSHIBA CORPORATION
> > + * Copyright (c) 2021 Toshiba Electronic Devices & Storage Corporation
> > + *
> > + * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> > + */
> > +
> > +#ifndef _VISCONTI_PLL_H_
> > +#define _VISCONTI_PLL_H_
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct visconti_pll_provider {
> > + void __iomem *reg_base;
> > + struct regmap *regmap;
> > + struct clk_onecell_data clk_data;
> > + struct device_node *node;
> > +};
> > +
> > +#define VISCONTI_PLL_RATE(_rate, _dacen, _dsmen, \
> > + _refdiv, _intin, _fracin, _postdiv1, _postdiv2) \
> > +{ \
> > + .rate = _rate, \
> > + .dacen = _dacen, \
> > + .dsmen = _dsmen, \
> > + .refdiv = _refdiv, \
> > + .intin = _intin, \
> > + .fracin = _fracin, \
> > + .postdiv1 = _postdiv1, \
> > + .postdiv2 = _postdiv2 \
> > +}
> > +
> > +struct visconti_pll_rate_table {
> > + unsigned long rate;
> > + unsigned int dacen;
> > + unsigned int dsmen;
> > + unsigned int refdiv;
> > + unsigned long intin;
> > + unsigned long fracin;
> > + unsigned int postdiv1;
> > + unsigned int postdiv2;
> > +};
> > +
> > +struct visconti_pll_info {
> > + unsigned int id;
> > + const char *name;
> > + const char *parent;
> > + u8 flags;
> > + unsigned long base_reg;
> > + const struct visconti_pll_rate_table *rate_table;
> > +};
> > +
> > +struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
> > + void __iomem *base,
> > + unsigned long nr_plls);
> > +void __init visconti_register_plls(struct visconti_pll_provider *ctx,
>
> __init can be dropped from header files. It serves no purpose.
>
OK, I will drop.
> > + const struct visconti_pll_info *list,
> > + unsigned int nr_plls, spinlock_t *lock);
> > +
> > +#endif /* _VISCONTI_PLL_H_ */
>
Best regards,
Nobuhiro
