On Thu 14 Oct 03:32 CDT 2021, Yassine Oudjana wrote: > MSM8996 Pro (MSM8996SG) has a few differences in the CBF clock. > I think it would be nice if you described what those differences are. Regards, Bjorn > Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> > --- > Dependencies: > - clk: qcom: msm8996-cpu: Add CBF support > https://lore.kernel.org/linux-arm-msm/20210528192541.1120703-1-konrad.dybcio@xxxxxxxxxxxxxx/ > > drivers/clk/qcom/clk-cpu-8996.c | 61 +++++++++++++++++++++------------ > 1 file changed, 40 insertions(+), 21 deletions(-) > > diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c > index 8afc271f92d0..ab2acbe74f0f 100644 > --- a/drivers/clk/qcom/clk-cpu-8996.c > +++ b/drivers/clk/qcom/clk-cpu-8996.c > @@ -70,11 +70,11 @@ enum _pmux_input { > > enum { > CBF_PLL_INDEX = 1, > - CBF_DIV_2_INDEX, > + CBF_DIV_INDEX, > CBF_SAFE_INDEX > }; > > -#define DIV_2_THRESHOLD 600000000 > +#define DIV_THRESHOLD 600000000 > #define PWRCL_REG_OFFSET 0x0 > #define PERFCL_REG_OFFSET 0x80000 > #define MUX_OFFSET 0x40 > @@ -142,6 +142,17 @@ static const struct alpha_pll_config cbfpll_config = { > .early_output_mask = BIT(3), > }; > > +static const struct alpha_pll_config cbfpll_config_pro = { > + .l = 72, > + .config_ctl_val = 0x200d4aa8, > + .config_ctl_hi_val = 0x006, > + .pre_div_mask = BIT(12), > + .post_div_mask = 0x3 << 8, > + .post_div_val = 0x3 << 8, > + .main_output_mask = BIT(0), > + .early_output_mask = BIT(3), > +}; > + > static struct clk_alpha_pll perfcl_pll = { > .offset = PERFCL_REG_OFFSET, > .regs = prim_pll_regs, > @@ -230,7 +241,8 @@ struct clk_cpu_8996_mux { > u8 width; > struct notifier_block nb; > struct clk_hw *pll; > - struct clk_hw *pll_div_2; > + struct clk_hw *pll_div; > + u8 div; > struct clk_regmap clkr; > }; > > @@ -280,11 +292,11 @@ static int clk_cpu_8996_mux_determine_rate(struct clk_hw *hw, > struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw); > struct clk_hw *parent = cpuclk->pll; > > - if (cpuclk->pll_div_2 && req->rate < DIV_2_THRESHOLD) { > - if (req->rate < (DIV_2_THRESHOLD / 2)) > + if (cpuclk->pll_div &&req->rate < DIV_THRESHOLD) { > + if (req->rate < (DIV_THRESHOLD / cpuclk->div)) > return -EINVAL; > > - parent = cpuclk->pll_div_2; > + parent = cpuclk->pll_div; > } > > req->best_parent_rate = clk_hw_round_rate(parent, req->rate); > @@ -336,7 +348,8 @@ static struct clk_cpu_8996_mux pwrcl_pmux = { > .shift = 0, > .width = 2, > .pll = &pwrcl_pll.clkr.hw, > - .pll_div_2 = &pwrcl_smux.clkr.hw, > + .pll_div = &pwrcl_smux.clkr.hw, > + .div = 2, > .nb.notifier_call = cpu_clk_notifier_cb, > .clkr.hw.init = &(struct clk_init_data) { > .name = "pwrcl_pmux", > @@ -358,7 +371,8 @@ static struct clk_cpu_8996_mux perfcl_pmux = { > .shift = 0, > .width = 2, > .pll = &perfcl_pll.clkr.hw, > - .pll_div_2 = &perfcl_smux.clkr.hw, > + .pll_div = &perfcl_smux.clkr.hw, > + .div = 2, > .nb.notifier_call = cpu_clk_notifier_cb, > .clkr.hw.init = &(struct clk_init_data) { > .name = "perfcl_pmux", > @@ -481,19 +495,23 @@ static int qcom_cbf_clk_msm8996_register_clks(struct device *dev, > struct regmap *regmap) > { > int ret; > + bool is_pro = of_device_is_compatible(dev->of_node, "qcom,msm8996pro-apcc"); > > - cbf_mux.pll_div_2 = clk_hw_register_fixed_factor(dev, "cbf_pll_main", > - "cbf_pll", CLK_SET_RATE_PARENT, > - 1, 2); > - if (IS_ERR(cbf_mux.pll_div_2)) { > + cbf_mux.div = is_pro ? 4 : 2; > + cbf_mux.pll_div = clk_hw_register_fixed_factor(dev, "cbf_pll_main", > + "cbf_pll", CLK_SET_RATE_PARENT, > + 1, cbf_mux.div); > + > + if (IS_ERR(cbf_mux.pll_div)) { > dev_err(dev, "Failed to initialize cbf_pll_main\n"); > - return PTR_ERR(cbf_mux.pll_div_2); > + return PTR_ERR(cbf_mux.pll_div); > } > > ret = devm_clk_register_regmap(dev, cbf_msm8996_clks[0]); > ret = devm_clk_register_regmap(dev, cbf_msm8996_clks[1]); > > - clk_alpha_pll_configure(&cbf_pll, regmap, &cbfpll_config); > + clk_alpha_pll_configure(&cbf_pll, regmap, is_pro ? > + &cbfpll_config_pro : &cbfpll_config); > clk_set_rate(cbf_pll.clkr.hw.clk, 614400000); > clk_prepare_enable(cbf_pll.clkr.hw.clk); > clk_notifier_register(cbf_mux.clkr.hw.clk, &cbf_mux.nb); > @@ -575,7 +593,7 @@ static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, > qcom_cpu_clk_msm8996_acd_init(base); > break; > case POST_RATE_CHANGE: > - if (cnd->new_rate < DIV_2_THRESHOLD) > + if (cnd->new_rate < DIV_THRESHOLD) > ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, > DIV_2_INDEX); > else > @@ -600,15 +618,15 @@ static int cbf_clk_notifier_cb(struct notifier_block *nb, unsigned long event, > > switch (event) { > case PRE_RATE_CHANGE: > - parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_DIV_2_INDEX); > - ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_2_INDEX); > + parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_DIV_INDEX); > + ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_INDEX); > > - if (cnd->old_rate > DIV_2_THRESHOLD && cnd->new_rate < DIV_2_THRESHOLD) > - ret = clk_set_rate(parent->clk, cnd->old_rate / 2); > + if (cnd->old_rate > DIV_THRESHOLD && cnd->new_rate < DIV_THRESHOLD) > + ret = clk_set_rate(parent->clk, cnd->old_rate / cbfclk->div); > break; > case POST_RATE_CHANGE: > - if (cnd->new_rate < DIV_2_THRESHOLD) > - ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_2_INDEX); > + if (cnd->new_rate < DIV_THRESHOLD) > + ret = clk_cpu_8996_mux_set_parent(&cbfclk->clkr.hw, CBF_DIV_INDEX); > else { > parent = clk_hw_get_parent_by_index(&cbfclk->clkr.hw, CBF_PLL_INDEX); > ret = clk_set_rate(parent->clk, cnd->new_rate); > @@ -676,6 +694,7 @@ static int qcom_cpu_clk_msm8996_driver_remove(struct platform_device *pdev) > > static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = { > { .compatible = "qcom,msm8996-apcc" }, > + { .compatible = "qcom,msm8996pro-apcc" }, > {} > }; > MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table); > -- > 2.33.0 > >
