This node is currently at /soc/thermal-zones, but the later introduced
bindings in commit 1202a442a31f ("dt-bindings: thermal: Add yaml bindings
for thermal zones") put this at /thermal-zones.
Fix dtb_check warning by moving the thermal-zones node to /
Fixes: e7251ed74ef7 ("arm64: dts: meson: g12: Add minimal thermal zone")
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxx>
---
I admit I'm a bit unsure about the 'Fixes' tag as at the time when those
thermal-zones were added there was no schema present. So there was no bug at
the time of writing. I'm ok either way.
.../boot/dts/amlogic/meson-g12-common.dtsi | 110 +++++++++---------
1 file changed, 55 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 00c6f53290d4..ff987e7ccff2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -159,61 +159,6 @@ &clkc CLKID_PCIE_COMB
status = "disabled";
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&cpu_temp>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <95000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
-
- ddr_thermal: ddr-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&ddr_temp>;
-
- trips {
- ddr_passive: ddr-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ddr_critical: ddr-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map {
- trip = <&ddr_passive>;
- cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-g12a-dwmac",
"snps,dwmac-3.70a",
@@ -2415,6 +2360,61 @@ mali: gpu@ffe40000 {
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&cpu_temp>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ ddr_thermal: ddr-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&ddr_temp>;
+
+ trips {
+ ddr_passive: ddr-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ddr_critical: ddr-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&ddr_passive>;
+ cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
--
2.33.1
