Re: [PATCH v2 2/3] phy/rockchip: add naneng combo phy for RK3568

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13-10-21, 18:19, Yifeng Zhao wrote:
> This patch implements a combo phy driver for Rockchip SoCs
> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
> sata-phy or sgmii-phy.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v2:
> - Using api devm_platform_get_and_ioremap_resource.
> - Modify rockchip_combphy_set_Mode.
> - Add some PHY registers definition.
> 
>  drivers/phy/rockchip/Kconfig                  |   8 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../rockchip/phy-rockchip-naneng-combphy.c    | 650 ++++++++++++++++++
>  3 files changed, 659 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index e812adad7242..9022e395c056 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY
>  	  Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
>  	  Innosilicon IP block.
>  
> +config PHY_ROCKCHIP_NANENG_COMBO_PHY
> +	tristate "Rockchip NANENG COMBO PHY Driver"
> +	depends on ARCH_ROCKCHIP && OF
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
> +	  combo PHY with NaNeng IP block.
> +
>  config PHY_ROCKCHIP_PCIE
>  	tristate "Rockchip PCIe PHY Driver"
>  	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index f0eec212b2aa..a5041efb5b8f 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY)	+= phy-rockchip-inno-csidphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY)	+= phy-rockchip-inno-dsidphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
> +obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> new file mode 100644
> index 000000000000..fbfc5fbbd5b8
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> @@ -0,0 +1,650 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PIPE USB3.0 PCIE SATA combphy driver
> + *
> + * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +#define BIT_WRITEABLE_SHIFT		16
> +#define REF_CLOCK_24MHz			24000000
> +#define REF_CLOCK_25MHz			25000000
> +#define REF_CLOCK_100MHz		100000000
> +/* RK3568 T22 COMBO PHY REG */
> +#define RK3568_T22_PHYREG5		(0x5 << 2)
> +#define T22_PHYREG5_PLL_DIV_MASK	GENMASK(7, 6)
> +#define T22_PHYREG5_PLL_DIV_SHIFT	6
> +#define T22_PHYREG5_PLL_DIV_2		1
> +
> +#define RK3568_T22_PHYREG6		(0x6 << 2)
> +#define T22_PHYREG6_TX_RTERM_MASK	GENMASK(7, 4)
> +#define T22_PHYREG6_TX_RTERM_SHIFT	4
> +#define T22_PHYREG6_TX_RTERM_50OHM	0x8
> +#define T22_PHYREG6_RX_RTERM_MASK	GENMASK(3, 0)
> +#define T22_PHYREG6_RX_RTERM_SHIFT	0
> +#define T22_PHYREG6_RX_RTERM_44OHM	0xF
> +
> +#define RK3568_T22_PHYREG7		(0x7 << 2)

Pls use GENMASK for these?

> +#define T22_PHYREG7_SSC_EN		BIT(4)
> +
> +#define RK3568_T22_PHYREG10		(0xA << 2)
> +#define T22_PHYREG10_SU_TRIM_0_7	0xF0
> +
> +#define RK3568_T22_PHYREG11		(0xB << 2)
> +#define T22_PHYREG11_PLL_LPF_ADJ	0x4
> +
> +#define RK3568_T22_PHYREG12		(0xC << 2)
> +#define T22_PHYREG12_RESISTER_MASK	GENMASK(5, 4)
> +#define T22_PHYREG12_RESISTER_SHIFT	0x4

bitfield.h has nice helpers which can extract/program values and avoid
one to define these shifts
-- 
~Vinod



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux