Implement the support for media-controller.
This means that the capabilities of the driver have changed and now
it also advertises the IO_MC .
The driver will register it's media device, and add the video entity to this
media device. The subdevices are registered to the same media device.
The ISC will have a base entity which is auto-detected as atmel_isc_base.
It will also register a subdevice that allows cropping of the incoming frame
to the maximum frame size supported by the ISC.
The ISC will create a link between the subdevice that is asynchronously
registered and the atmel_isc_scaler entity.
Then, the atmel_isc_scaler and atmel_isc_base are connected through another
link.
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
drivers/media/platform/atmel/Makefile | 2 +-
drivers/media/platform/atmel/atmel-isc-base.c | 20 +-
drivers/media/platform/atmel/atmel-isc-mc.c | 235 ++++++++++++++++++
drivers/media/platform/atmel/atmel-isc.h | 28 +++
.../media/platform/atmel/atmel-sama5d2-isc.c | 14 +-
.../media/platform/atmel/atmel-sama7g5-isc.c | 12 +-
6 files changed, 306 insertions(+), 5 deletions(-)
create mode 100644 drivers/media/platform/atmel/atmel-isc-mc.c
diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
index 1f6fe7427769..90220eaefa20 100644
--- a/drivers/media/platform/atmel/Makefile
+++ b/drivers/media/platform/atmel/Makefile
@@ -3,7 +3,7 @@ atmel-isc-objs = atmel-sama5d2-isc.o
atmel-xisc-objs = atmel-sama7g5-isc.o
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
-obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o atmel-isc-clk.o
+obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o atmel-isc-clk.o atmel-isc-mc.o
obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += microchip-csi2dc.o
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index f782a9c0c07d..a0e4bc75d1a2 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1727,6 +1727,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
struct isc_device, v4l2_dev);
struct isc_subdev_entity *subdev_entity =
container_of(notifier, struct isc_subdev_entity, notifier);
+ int pad;
if (video_is_registered(&isc->video_dev)) {
v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
@@ -1735,6 +1736,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
subdev_entity->sd = subdev;
+ pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (pad < 0) {
+ v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n",
+ subdev->name);
+ return pad;
+ }
+
+ isc->remote_pad = pad;
+
return 0;
}
@@ -1910,7 +1921,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
vdev->queue = q;
vdev->lock = &isc->lock;
vdev->ctrl_handler = &isc->ctrls.handler;
- vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
+ vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_IO_MC;
video_set_drvdata(vdev, isc);
ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
@@ -1920,8 +1932,14 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
goto isc_async_complete_err;
}
+ ret = isc_mc_register(isc);
+ if (ret < 0)
+ goto isc_async_complete_unregister_device;
return 0;
+isc_async_complete_unregister_device:
+ video_unregister_device(vdev);
+
isc_async_complete_err:
mutex_destroy(&isc->lock);
return ret;
diff --git a/drivers/media/platform/atmel/atmel-isc-mc.c b/drivers/media/platform/atmel/atmel-isc-mc.c
new file mode 100644
index 000000000000..fe9ebb46e270
--- /dev/null
+++ b/drivers/media/platform/atmel/atmel-isc-mc.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Microchip Image Sensor Controller (ISC) Media Controller support
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc.
+ *
+ * Author: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "atmel-isc-regs.h"
+#include "atmel-isc.h"
+
+static const struct media_device_ops isc_media_ops = {
+};
+
+static int isc_scaler_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *format)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ format->format = isc->scaler_format;
+
+ if (format->pad == 1) {
+ if (format->format.height > isc->max_height)
+ format->format.height = isc->max_height;
+ if (format->format.width > isc->max_width)
+ format->format.width = isc->max_width;
+ }
+
+ return 0;
+}
+
+static int isc_scaler_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *req_fmt)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ if (req_fmt->pad == 1) {
+ if (req_fmt->format.height > isc->max_height)
+ req_fmt->format.height = isc->max_height;
+ if (req_fmt->format.width > isc->max_width)
+ req_fmt->format.width = isc->max_width;
+ }
+
+ isc->scaler_format = req_fmt->format;
+
+ return 0;
+}
+
+static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+ int supported_index = 0;
+ int i;
+
+ for (i = 0; i < isc->formats_list_size; i++) {
+ if (!isc->formats_list[i].sd_support)
+ continue;
+ if (supported_index == code->index) {
+ code->code = isc->formats_list[i].mbus_code;
+ return 0;
+ }
+ supported_index++;
+ }
+
+ return -EINVAL;
+}
+
+static int isc_scaler_g_sel(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_selection *sel)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ if (sel->pad == ISC_SCALER_PAD_SOURCE)
+ return -EINVAL;
+
+ if (sel->target != V4L2_SEL_TGT_CROP_BOUNDS &&
+ sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ sel->r.height = isc->max_height;
+ sel->r.width = isc->max_width;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
+ .enum_mbus_code = isc_scaler_enum_mbus_code,
+ .set_fmt = isc_scaler_set_fmt,
+ .get_fmt = isc_scaler_get_fmt,
+ .get_selection = isc_scaler_g_sel,
+};
+
+static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
+ .pad = &isc_scaler_pad_ops,
+};
+
+static int isc_init_own_sd(struct isc_device *isc)
+{
+ int ret;
+
+ v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops);
+
+ isc->scaler_sd.owner = THIS_MODULE;
+ isc->scaler_sd.dev = isc->dev;
+ snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name),
+ "atmel_isc_scaler");
+
+ isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
+ isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+ isc->scaler_format.height = isc->max_height;
+ isc->scaler_format.width = isc->max_width;
+
+ ret = media_entity_pads_init(&isc->scaler_sd.entity,
+ ISC_SCALER_PADS_NUM,
+ isc->scaler_pads);
+ if (ret < 0) {
+ dev_err(isc->dev, "scaler sd media entity init failed\n");
+ return ret;
+ }
+ ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd);
+ if (ret < 0) {
+ dev_err(isc->dev, "scaler sd failed to register subdev\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+int isc_mc_init(struct isc_device *isc, u32 ver)
+{
+ const struct of_device_id *match;
+ int ret;
+
+ isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
+ isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
+ isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+
+ ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
+ isc->pads);
+ if (ret < 0) {
+ dev_err(isc->dev, "media entity init failed\n");
+ return ret;
+ }
+
+ isc->mdev.dev = isc->dev;
+ isc->mdev.ops = &isc_media_ops;
+
+ match = of_match_node(isc->dev->driver->of_match_table,
+ isc->dev->of_node);
+
+ strscpy(isc->mdev.driver_name, KBUILD_MODNAME,
+ sizeof(isc->mdev.driver_name));
+ strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model));
+ snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
+ isc->v4l2_dev.name);
+ isc->mdev.hw_revision = ver;
+
+ media_device_init(&isc->mdev);
+
+ isc->v4l2_dev.mdev = &isc->mdev;
+
+ return isc_init_own_sd(isc);
+}
+
+int isc_mc_register(struct isc_device *isc)
+{
+ int ret;
+
+ ret = media_create_pad_link(&isc->current_subdev->sd->entity,
+ isc->remote_pad, &isc->scaler_sd.entity,
+ ISC_SCALER_PAD_SINK,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+
+ if (ret < 0) {
+ v4l2_err(&isc->v4l2_dev,
+ "Failed to create pad link: %s to %s\n",
+ isc->current_subdev->sd->entity.name,
+ isc->scaler_sd.entity.name);
+ return ret;
+ }
+
+ dev_dbg(isc->dev, "link with %s pad: %d\n",
+ isc->current_subdev->sd->name, isc->remote_pad);
+
+ ret = media_create_pad_link(&isc->scaler_sd.entity,
+ ISC_SCALER_PAD_SOURCE,
+ &isc->video_dev.entity, ISC_PAD_SINK,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+
+ if (ret < 0) {
+ v4l2_err(&isc->v4l2_dev,
+ "Failed to create pad link: %s to %s\n",
+ isc->scaler_sd.entity.name,
+ isc->video_dev.entity.name);
+ return ret;
+ }
+
+ dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name,
+ ISC_SCALER_PAD_SOURCE);
+
+ return media_device_register(&isc->mdev);
+}
+
+void isc_mc_cleanup(struct isc_device *isc)
+{
+ media_entity_cleanup(&isc->video_dev.entity);
+}
diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
index dd45e9ca22a9..27292c50915e 100644
--- a/drivers/media/platform/atmel/atmel-isc.h
+++ b/drivers/media/platform/atmel/atmel-isc.h
@@ -176,6 +176,17 @@ struct isc_reg_offsets {
u32 his_entry;
};
+enum isc_mc_pads {
+ ISC_PAD_SINK = 0,
+ ISC_PADS_NUM = 1,
+};
+
+enum isc_scaler_pads {
+ ISC_SCALER_PAD_SINK = 0,
+ ISC_SCALER_PAD_SOURCE = 1,
+ ISC_SCALER_PADS_NUM = 2,
+};
+
/*
* struct isc_device - ISC device driver data/config struct
* @regmap: Register map
@@ -339,6 +350,19 @@ struct isc_device {
struct isc_format *formats_list;
u32 controller_formats_size;
u32 formats_list_size;
+
+ struct {
+ struct media_pad pads[ISC_PADS_NUM];
+ struct media_device mdev;
+
+ u32 remote_pad;
+ };
+
+ struct {
+ struct v4l2_subdev scaler_sd;
+ struct media_pad scaler_pads[ISC_SCALER_PADS_NUM];
+ struct v4l2_mbus_framefmt scaler_format;
+ };
};
extern const struct regmap_config isc_regmap_config;
@@ -350,4 +374,8 @@ int isc_clk_init(struct isc_device *isc);
void isc_subdev_cleanup(struct isc_device *isc);
void isc_clk_cleanup(struct isc_device *isc);
+int isc_mc_init(struct isc_device *isc, u32 ver);
+int isc_mc_register(struct isc_device *isc);
+void isc_mc_cleanup(struct isc_device *isc);
+
#endif
diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
index e29a9193bac8..8c088ad899ea 100644
--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
@@ -528,6 +528,12 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}
+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
+
+ ret = isc_mc_init(isc, ver);
+ if (ret < 0)
+ goto isc_probe_mc_init_err;
+
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_request_idle(dev);
@@ -537,7 +543,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
ret = clk_prepare_enable(isc->ispck);
if (ret) {
dev_err(dev, "failed to enable ispck: %d\n", ret);
- goto cleanup_subdev;
+ goto isc_probe_mc_init_err;
}
/* ispck should be greater or equal to hclock */
@@ -547,7 +553,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
goto unprepare_clk;
}
- regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
dev_info(dev, "Microchip ISC version %x\n", ver);
return 0;
@@ -555,6 +560,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
unprepare_clk:
clk_disable_unprepare(isc->ispck);
+isc_probe_mc_init_err:
+ isc_mc_cleanup(isc);
+
cleanup_subdev:
isc_subdev_cleanup(isc);
@@ -575,6 +583,8 @@ static int atmel_isc_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
+ isc_mc_cleanup(isc);
+
isc_subdev_cleanup(isc);
v4l2_device_unregister(&isc->v4l2_dev);
diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
index 6a5d3f7ce75e..3484971ff9be 100644
--- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
@@ -522,15 +522,23 @@ static int microchip_xisc_probe(struct platform_device *pdev)
break;
}
+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
+
+ ret = isc_mc_init(isc, ver);
+ if (ret < 0)
+ goto isc_probe_mc_init_err;
+
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_request_idle(dev);
- regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
dev_info(dev, "Microchip XISC version %x\n", ver);
return 0;
+isc_probe_mc_init_err:
+ isc_mc_cleanup(isc);
+
cleanup_subdev:
isc_subdev_cleanup(isc);
@@ -551,6 +559,8 @@ static int microchip_xisc_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
+ isc_mc_cleanup(isc);
+
isc_subdev_cleanup(isc);
v4l2_device_unregister(&isc->v4l2_dev);
--
2.25.1
