Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/irqchip/Kconfig | 4 +++-
drivers/irqchip/irq-bcm7038-l1.c | 6 +++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4d5924e9f766..3022f6137096 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -115,7 +115,9 @@ config BCM6345_L1_IRQ
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config BCM7038_L1_IRQ
- bool
+ tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ default ARCH_BRCMSTB || BMIPS_GENERIC
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 357570dd8780..a62b96237b82 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -455,4 +455,8 @@ static int __init bcm7038_l1_of_init(struct device_node *dn,
return ret;
}
-IRQCHIP_DECLARE(bcm7038_l1, "brcm,bcm7038-l1-intc", bcm7038_l1_of_init);
+IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7038_l1)
+IRQCHIP_MATCH("brcm,bcm7038-l1-intc", bcm7038_l1_of_init)
+IRQCHIP_PLATFORM_DRIVER_END(bcm7038_l1)
+MODULE_DESCRIPTION("Broadcom STB 7038-style L1/L2 interrupt controller");
+MODULE_LICENSE("GPL v2");
--
2.25.1
