Hello all,
This series is now stable and brings support for external/modular ECC
engines, and let SPI controller using the ECC framework.
As a first example, Macronix ECC engine can be used as an
external engine (takes the data, proceeds to the calculations, writes
back the ECC bytes) or as a pipelined engine doing on-the-fly
calculations (which is very common in the raw NAND world).
In the device tree, the ECC engine should be described as a separated DT
node. Then:
* external case: the flash node should provide a nand-ecc-engine
property pointing to the ECC engine node.
* pipelined case: the flash node should provide a nand-ecc-engine
property pointing to the SPI controller, itself with another
nand-ecc-engine property pointing at the ECC engine node.
This series comes with a bunch of improvements on the binding side as
well.
Cheers,
Miquèl
Changes since the RFC:
* Rebased on top of v5.15-rc1.
* Fixed the dirmap configuration.
* Added the various tags received.
* Fixed the bindings as reported by the robots.
* Fixed the return value of the helper counting bitflips.
* Included a fix from Jaime Liao in the external pattern logic.
* Added the yaml conversion of Macronix SPI controller description.
* Added the yaml conversion of the SPI-NAND description.
* Created a nand-chip.yaml file to share properties between SPI-NAND and
raw NAND.
Mason Yang (1):
mtd: spinand: macronix: Use random program load
Miquel Raynal (17):
dt-bindings: mtd: nand-controller: Fix the reg property description
dt-bindings: mtd: nand-controller: Fix a comment in the examples
dt-bindings: mtd: nand-chip: Create a NAND chip description
dt-bindings: mtd: spi-nand: Convert spi-nand description file to yaml
dt-bindings: vendor-prefixes: Clarify Macronix prefix
dt-bindings: spi: mxic: The interrupt property is not mandatory
dt-bindings: spi: mxic: Convert to yaml
dt-bindings: mtd: Describe Macronix NAND ECC engine
dt-bindings: spi: mxic: Document the nand-ecc-engine property
mtd: nand: ecc: Add infrastructure to support hardware engines
mtd: nand: mxic-ecc: Add Macronix external ECC engine support
mtd: nand: mxic-ecc: Support SPI pipelined mode
spi: mxic: Fix the transmit path
spi: mxic: Create a helper to configure the controller before an
operation
spi: mxic: Create a helper to ease the start of an operation
spi: mxic: Add support for direct mapping
spi: mxic: Add support for pipelined ECC operations
.../bindings/mtd/mxicy,nand-ecc-engine.yaml | 77 ++
.../devicetree/bindings/mtd/nand-chip.yaml | 71 ++
.../bindings/mtd/nand-controller.yaml | 57 +-
.../devicetree/bindings/mtd/spi-nand.txt | 5 -
.../devicetree/bindings/mtd/spi-nand.yaml | 27 +
.../bindings/spi/mxicy,mx25f0a-spi.yaml | 73 ++
.../devicetree/bindings/spi/spi-mxic.txt | 34 -
.../devicetree/bindings/vendor-prefixes.yaml | 3 +
drivers/mtd/nand/Kconfig | 6 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/core.c | 10 +-
drivers/mtd/nand/ecc-mxic.c | 799 ++++++++++++++++++
drivers/mtd/nand/ecc.c | 89 ++
drivers/mtd/nand/spi/macronix.c | 2 +-
drivers/spi/spi-mxic.c | 328 +++++--
include/linux/mtd/nand-ecc-mxic.h | 36 +
include/linux/mtd/nand.h | 11 +
17 files changed, 1483 insertions(+), 146 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
create mode 100644 Documentation/devicetree/bindings/mtd/nand-chip.yaml
delete mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.yaml
create mode 100644 Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-mxic.txt
create mode 100644 drivers/mtd/nand/ecc-mxic.c
create mode 100644 include/linux/mtd/nand-ecc-mxic.h
--
2.27.0
