The default delay value for power cycle the sd card is 1ms. Since this is
sufficient we can remove this value here.
Fixes: 5dbadc848259 ("arm64: dts: fsl: add support for Kontron pitx-imx8m board")
Signed-off-by: Heiko Thiery <heiko.thiery@xxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index f593e4ff62e1..e4429a1c874d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -51,7 +51,6 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- off-on-delay-us = <20000>;
enable-active-high;
};
};
--
2.30.2
