Hi Sam,
@@ -99,6 +101,18 @@ gic: interrupt-controller@c000000 {
> interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + infracfg: infracfg@10001000 {
> + compatible = "mediatek,mt7986-infracfg",
> "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + topckgen: topckgen@1001b000 {
> + compatible = "mediatek,mt7986-topckgen",
> "syscon";
> + reg = <0 0x1001B000 0 0x1000>;
please use lowercase hex values (e.g, 0x1001b000)
> + #clock-cells = <1>;
> + };
> +
> watchdog: watchdog@1001c000 {
> compatible = "mediatek,mt7986-wdt",
> "mediatek,mt6589-wdt";
> @@ -108,11 +122,31 @@ watchdog: watchdog@1001c000 {
> status = "disabled";
> };
>
> + apmixedsys: apmixedsys@1001e000 {
> + compatible = "mediatek,mt7986-apmixedsys";
> + reg = <0 0x1001E000 0 0x1000>;
> + #clock-cells = <1>;
> + };
Ditto
> +
> + sgmiisys0: syscon@10060000 {
> + compatible = "mediatek,mt7986-sgmiisys_0",
> + "syscon";
> + reg = <0 0x10060000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + sgmiisys1: syscon@10070000 {
> + compatible = "mediatek,mt7986-sgmiisys_1",
> + "syscon";
> + reg = <0 0x10070000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> trng: trng@1020f000 {
> compatible = "mediatek,mt7986-rng",
> "mediatek,mt7623-rng";
> reg = <0 0x1020f000 0 0x100>;
> - clocks = <&system_clk>;
> + clocks = <&infracfg CLK_INFRA_TRNG_CK>;
> clock-names = "rng";
> status = "disabled";
> };
> @@ -122,7 +156,13 @@ uart0: serial@11002000 {
> "mediatek,mt6577-uart";
> reg = <0 0x11002000 0 0x400>;
> interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&system_clk>;
> + clocks = <&infracfg CLK_INFRA_UART0_SEL>,
> + <&infracfg CLK_INFRA_UART0_CK>;
> + clock-names = "baud", "bus";
> + assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
> + <&infracfg
> CLK_INFRA_UART0_SEL>;
> + assigned-clock-parents = <&topckgen
> CLK_TOP_XTAL>,
> + <&topckgen
> CLK_TOP_UART_SEL>;
> status = "disabled";
> };
>
> @@ -131,7 +171,11 @@ uart1: serial@11003000 {
> "mediatek,mt6577-uart";
> reg = <0 0x11003000 0 0x400>;
> interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&system_clk>;
> + clocks = <&infracfg CLK_INFRA_UART1_SEL>,
> + <&infracfg CLK_INFRA_UART1_CK>;
> + clock-names = "baud", "bus";
> + assigned-clocks = <&infracfg
> CLK_INFRA_UART1_SEL>;
> + assigned-clock-parents = <&topckgen
> CLK_TOP_F26M_SEL>;
> status = "disabled";
> };
>
> @@ -140,10 +184,24 @@ uart2: serial@11004000 {
> "mediatek,mt6577-uart";
> reg = <0 0x11004000 0 0x400>;
> interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&system_clk>;
> + clocks = <&infracfg CLK_INFRA_UART2_SEL>,
> + <&infracfg CLK_INFRA_UART2_CK>;
> + clock-names = "baud", "bus";
> + assigned-clocks = <&infracfg
> CLK_INFRA_UART2_SEL>;
> + assigned-clock-parents = <&topckgen
> CLK_TOP_F26M_SEL>;
> status = "disabled";
> };
>
> + ethsys: syscon@15000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mediatek,mt7986-ethsys",
> + "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> };
>
> };
